- Postcode district
- FY1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Poulton-le-Fylde, Thornton-Cleveleys, Lytham St Annes
- Building rules
- England
Are timber and alu-clad sliding doors right for your Blackpool home?
Here is what to weigh up if you are considering timber and alu-clad sliding doors for a home in Blackpool:
Because timber and alu-clad sliding doors typically take 8–10 weeks to make, a Blackpool building programme runs more smoothly when the survey happens as soon as the opening size is fixed.
For a listed building or a house in a conservation area in Blackpool, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
- An alu-clad exterior shields the wood from rain and sunlight, so the outside needs only washing while the inside keeps a natural timber finish.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
Planning glass for the light in Blackpool
At the latitude of Blackpool, the midday sun climbs to about 60° in late June but only about 13° in late December, when daylight lasts around 7 h 24 min against 17 h 06 min in midsummer. A south-facing timber and alu-clad sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for timber and alu-clad sliding doors in Blackpool
Guide prices are the same across Lancashire: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £6,495–£7,995 |
| 4.8 m | 4 panels | £10,395–£12,595 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
From survey to fitted door in Blackpool
A surveyor visits your Blackpool home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 8–10 weeks from survey sign-off — and fitting usually takes 1 day for a two-panel swap; 1–2 days for larger doors. We also cover Poulton-le-Fylde (5 km north-east) and Thornton-Cleveleys (7 km north).
Rules for timber and alu-clad sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for timber and alu-clad sliding doors in Blackpool
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
- Glass. Double or triple glazed safety glass, with slim glazing bars available for a period look.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
Questions about timber and alu-clad sliding doors in Blackpool
Do I need building approval for timber and alu-clad sliding doors in Blackpool?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
Are timber sliding doors secure?
Timber sliding doors are secure when built with multi-point locking, laminated glass and robust sections, because engineered timber gives the locking keeps a solid, dense fixing. Timber systems are available tested to PAS 24, the UK enhanced security test standard for doorsets. Internally beaded glass and a key-locking handle add further resistance to forced entry.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.