- Postcode district
- WS7
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Lichfield, Cannock, Aldridge
- Building rules
- England
What aluminium sliding doors offer homes in Burntwood
Before you settle on a door type, it helps to know what aluminium sliding doors do well and what to check before you order.
Thinking about a dark frame for a house in Burntwood? Anthracite grey and black powder coats show off slim aluminium sightlines, and dual colour keeps the inside lighter if you prefer.
Before aluminium sliding doors are ordered for a Burntwood home, the survey should check the opening width, floor levels and existing lintel, so the quote reflects the real job.
- Panels run on adjustable tandem rollers along a hard-wearing track, so even a heavy double or triple glazed panel can be opened smoothly with one hand.
- Aluminium is stiff enough to carry wide panels without bowing, which keeps the number of vertical frames low even across openings of four, five or six metres.
- Multi-point hook locks grip the frame at several points along the closing edge, while anti-lift blocks stop a shut panel being raised off its track from outside.
How much sun will a door in Burntwood get?
Daylight in Burntwood runs from about 7 h 37 min in December to 16 h 52 min in June, with the noon sun at roughly 14° and 61° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Typical costs for aluminium sliding doors around Burntwood
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Burntwood home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £3,995–£4,895 |
| 3.0 m | 2 panels | £4,995–£6,095 |
| 3.6 m | 3 panels | £5,595–£6,895 |
See every size on the aluminium sliding doors page or try the guide price tool.
From survey to fitted door in Burntwood
We plan the job around your home in Burntwood: survey first, then a written quote, then manufacture (typically 4–6 weeks from survey sign-off). The fitting itself usually takes 1 day for a two-panel straight swap; 1–2 days for larger doors. If you are in Lichfield or Cannock, the same process and prices apply.
Do you need approval in Burntwood?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for aluminium sliding doors
- Colours. Standard shades such as anthracite grey, black and white, or a special RAL colour for an extra charge.
- Handles and locks. Slim pull handles or lever handles in matching or contrasting finishes, with an enhanced security locking pack available.
- Panel configuration. Two, three or four panels, with the sliding panel on the left, right or both sides to suit how you use the room.
Questions about aluminium sliding doors in Burntwood
Is the price different in Burntwood?
No. Guide prices for aluminium sliding doors are the same across mainland Britain, including Burntwood. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How wide can an aluminium sliding door be?
An aluminium sliding door in our range can span from about 1.5 m to 6 m, split into two to four panels. Each panel is usually up to about 2.5–3 m wide depending on the system and the weight of the glass. Wider openings take more panels, and beyond about 6 m a multi-track or lift and slide system is usually the more practical choice.
How long do aluminium sliding doors take to arrive?
Aluminium sliding doors typically take 4–6 weeks to make after you sign off the surveyed specification, because each door is built to measure and powder coated to order. Fitting a straight swap of a two-panel door typically takes 1 day, and larger doors 1–2 days. These are typical times rather than promises, and we confirm a date once the order is placed.
Do aluminium sliding doors need Building Regulations approval?
In England, replacement sliding doors are controlled fittings, so the work is either carried out by an installer registered with a competent person scheme, who self-certifies and notifies, or notified to Building Control. The glass must be safety glazing to BS EN 12600. Forming or widening an opening is structural work needing its own application and calculations. Wales, Scotland and Northern Ireland have their own rules.