Anthracite grey sliding doors across Rutland
Here is what to weigh up if you are considering anthracite grey sliding doors for a home in Rutland:
If the windows on your Rutland home are already anthracite, take a photo of the colour label on a frame or the paperwork so the door can be specified to the same RAL number.
Choosing a colour for a Rutland extension that will be seen from the garden all day? Hold textured and smooth anthracite samples up in daylight before committing to either.
- Because the colour is part of the frame, not a film over it, small marks on aluminium can usually be touched in with a matched repair kit rather than replacing the section.
- Powder coating is cured in an oven into a continuous film, giving a hard-wearing finish that does not need repainting, only occasional washing with mild soapy water.
- Grey sits comfortably with a wide range of materials, from buff and red brick to white render, timber cladding and stone, which keeps future redecorating options open.
Guide prices for anthracite grey sliding doors in Rutland
Guide prices are the same across Rutland: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £3,695–£4,495 |
| 3.0 m | 2 panels | £4,995–£6,095 |
| 3.6 m | 3 panels | £5,595–£6,895 |
| 4.0 m | 3 panels | £6,095–£7,395 |
Every size is on the anthracite grey sliding doors page.
Daylight and glass in Rutland
The midday sun over Rutland ranges from about 14° at the winter solstice to about 61° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Where we fit in Rutland
We cover Oakham, Uppingham and the rest of Rutland.
Approvals in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Questions about anthracite grey sliding doors in Rutland
Do you fit anthracite grey sliding doors in Rutland?
Yes. We survey and fit anthracite grey sliding doors in Rutland and across Rutland, including Oakham and Uppingham. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How do I clean anthracite sliding doors?
Wash anthracite frames with warm water, a little mild detergent and a soft cloth, then rinse and dry. Avoid abrasive pads, solvents and strong household cleaners, which can dull or mark the powder coating. Vacuum grit out of the track before wiping it, because dirt in the track wears rollers and makes the door feel stiff to slide.
What colour is RAL 7016?
RAL 7016 is anthracite grey, a dark grey with a slight blue undertone. It is one of the most widely specified colours for aluminium and uPVC windows and doors in the UK. On a sliding door it looks lighter in bright daylight and closer to charcoal on an overcast day, so it is worth seeing a physical sample outdoors before deciding.
Can I have anthracite outside and white inside?
Yes, a dual colour frame lets you have anthracite grey outside and white or another colour inside. Thermally broken aluminium frames have separate inner and outer sections joined by an insulating bar, so each side can be powder coated in its own colour before the frame is assembled. Dual colour adds a modest percentage to the price, which your quote shows.