Are corner sliding doors right for homes in Aberdeenshire and Moray?
These are the points a surveyor will go through with you when you choose corner sliding doors for a home in Aberdeenshire and Moray:
If you are planning a wraparound extension in Aberdeenshire and Moray, designing corner sliding doors in from the start lets the engineer size the corner steelwork alongside the roof.
On any corner installation in Aberdeenshire and Moray, the survey records floor and patio levels along both walls, because a terrace that falls differently on each side changes the threshold detail.
- When closed, the two corner panels interlock and lock together, so the glass corner stays weathertight and secure without a visible column.
- Because panels slide rather than fold, the corner can be opened on one side only, keeping the other side closed as a wind screen on cooler days.
- Daylight reaches the room from two directions, which keeps a deep extension brighter through the day as the sun moves round the house.
Guide prices for corner sliding doors in Aberdeenshire and Moray
Pricing does not change because you are in Aberdeenshire and Moray: the ranges below include fitting, structural calculations and VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 3.6 m | 4 panels | £9,595–£11,795 |
| 4.8 m | 4 panels | £11,495–£13,995 |
| 6.0 m | 6 panels | £13,395–£16,295 |
Every size is on the corner sliding doors page.
Daylight and glass in Aberdeenshire and Moray
Daylight in Aberdeenshire and Moray runs from about 6 h 37 min in December to 18 h 00 min in June, with the noon sun at roughly 9° and 56° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Towns we cover in Aberdeenshire and Moray
We survey and fit corner sliding doors in 14 towns across Aberdeenshire and Moray, including the AB11, AB12, AB31, AB32, AB39, AB41 postcode districts.
Approvals in Scotland
In Scotland, forming or widening an opening needs a building warrant before work starts, with structural details for the new beam. The door must meet the Scottish building standards for energy and safety glazing.
Questions about corner sliding doors in Aberdeenshire and Moray
Do I need building approval for corner sliding doors in Aberdeenshire and Moray?
In Scotland a like-for-like replacement door usually needs no building warrant, but must meet the building standards; new openings need a warrant. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Can I add a corner sliding door to an existing house?
A corner sliding door can be added to an existing house, but it is a structural project rather than a door swap: the corner of the building has to be rebuilt with engineered steel to carry the load where the post or wall used to be. It is usually done as part of an extension or rear remodel, and a survey plus an engineer's assessment confirm what the structure above needs.
How long does a corner sliding door project take?
A corner sliding door typically takes 4–6 weeks to manufacture in standard aluminium and 6–8 weeks for slimline or lift and slide systems, from survey sign-off. The steelwork and building work usually take 3–5 days before the door goes in, and fitting the door takes 1–2 days. Engineer design and approvals come first, so the door is ordered once the steel is designed.
How do you maintain a corner sliding door?
Maintaining a corner sliding door is much like any aluminium slider, with extra attention to the corner: keep both tracks and the corner drainage clear, wipe the corner seals, and check the meeting panels still lock smoothly. Rollers can be adjusted if a panel drops. Because a new extension can settle slightly in its first year, the corner panels may need a small adjustment after that.