Corner sliding doors across Perth and Kinross
A few practical points decide whether corner sliding doors suit a particular room and opening:
If you are planning a wraparound extension in Perth and Kinross, designing corner sliding doors in from the start lets the engineer size the corner steelwork alongside the roof.
A Perth and Kinross garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
- A corner of glass gives a much wider field of view than a single straight door, taking in more of the garden from a seat inside.
- With no post at the corner, sliding both sets of panels back opens the meeting point of two walls completely, so the room spills straight onto the patio.
- Daylight reaches the room from two directions, which keeps a deep extension brighter through the day as the sun moves round the house.
Guide prices for corner sliding doors in Perth and Kinross
Guide prices include the door, fitting and structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 4 panels | £9,595–£11,795 |
| 4.0 m | 4 panels | £10,295–£12,495 |
| 4.8 m | 4 panels | £11,495–£13,995 |
| 6.0 m | 6 panels | £13,395–£16,295 |
Every size is on the corner sliding doors page.
Daylight and glass in Perth and Kinross
In Perth and Kinross the shortest day has roughly 6 h 50 min of daylight and the longest about 17 h 44 min. The noon sun sits near 10° above the horizon in winter and 57° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Towns we cover in Perth and Kinross
We survey and fit corner sliding doors in 7 towns across Perth and Kinross, including the KY13, PH10, PH15, PH16, PH2, PH3 postcode districts.
Approvals in Scotland
A new opening in Scotland is warrant work: the council needs structural information for the beam and opening before building starts, and the finished door must meet the Scottish standards.
Questions about corner sliding doors in Perth and Kinross
Do you fit corner sliding doors in Perth and Kinross?
Yes. We survey and fit corner sliding doors in Perth and Kinross and across Perth and Kinross, including Perth and Aberfeldy. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.
How long does a corner sliding door project take?
A corner sliding door typically takes 4–6 weeks to manufacture in standard aluminium and 6–8 weeks for slimline or lift and slide systems, from survey sign-off. The steelwork and building work usually take 3–5 days before the door goes in, and fitting the door takes 1–2 days. Engineer design and approvals come first, so the door is ordered once the steel is designed.
How do you maintain a corner sliding door?
Maintaining a corner sliding door is much like any aluminium slider, with extra attention to the corner: keep both tracks and the corner drainage clear, wipe the corner seals, and check the meeting panels still lock smoothly. Rollers can be adjusted if a panel drops. Because a new extension can settle slightly in its first year, the corner panels may need a small adjustment after that.