Are sliding door repairs right for homes in Perth and Kinross?
Most sliding door problems come down to a handful of worn parts, and a repair is often far cheaper than a new door:
Is the patio door in your Perth and Kinross house leaking at the bottom after heavy rain? Check the drainage slots in the outer frame are clear before assuming a seal has failed.
Before calling out anyone in Perth and Kinross for a door that will not lock, check whether the panel has dropped: if the hooks no longer meet the keeps, adjustment may be all it needs.
- Adjusting a dropped or misaligned panel can cure draughts, rattles and a door that will not close fully against its seals.
- A well-maintained, repaired door can give years more service, making a repair a sensible first step when the frame and glass are otherwise sound.
- Misted sealed units can usually be replaced individually with new safety glass units, restoring the view and the insulation of that panel.
Repair prices in Perth and Kinross
Repair prices are the same across Perth and Kinross. These guide prices include VAT, parts and the visit to carry out the repair. Most faults can be priced from photos; if we need to see the door first, a diagnostic visit costs £95 inc VAT, confirmed before we attend.
| Repair | Guide price inc VAT |
|---|---|
| Handle replacement | £95–£165 |
| Re-alignment, adjustment and service | £125–£195 |
| Track repair or refurbishment | £195–£395 |
| Misted sealed unit replacement (per pane) | £225–£495 |
| Roller replacement (per sliding panel) | £185–£325 |
Towns we cover in Perth and Kinross
We survey and fit sliding door repairs in 7 towns across Perth and Kinross, including the KY13, PH10, PH15, PH16, PH2, PH3 postcode districts.
Approvals in Scotland
Repairs do not need a building warrant in Scotland. Any replacement glass we fit in a door is safety glazing.
Questions about sliding door repairs in Perth and Kinross
Is it worth repairing an old sliding door in Perth and Kinross?
Often, yes. New rollers, a lock gearbox or a track refurbishment cost a fraction of a new door. If the frame is twisted or the door fails on thermal performance, we will say so and price a replacement instead.
Can you replace misted glass in a sliding door?
Yes, a misted sealed unit in a sliding door can usually be replaced on its own without changing the frame. The new unit is made to the size of the old one in safety glass, as glass in doors must be, and fitted into the existing panel. It is worth checking whether the frame is still sound first.
How do I know if my sliding door rollers need replacing?
Sliding door rollers usually need replacing when the panel becomes hard to push, rumbles or grinds as it moves, sits lower at one end or jumps off the track. Cleaning the track first is worth trying, because grit can cause similar symptoms. If the door is still heavy once the track is clean, the rollers are likely worn or broken.
Why won't my sliding door lock?
A sliding door that will not lock usually has a failed lock gearbox, a worn or broken keep, or a panel that has dropped so the hooks no longer line up with the frame. Forcing the handle can make it worse. Photos of the handle, the lock edge and the frame where the hooks engage usually show which part has failed.