- Postcode district
- LL32
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Llandudno, Colwyn Bay, Abergele
- Building rules
- Wales
What corner sliding doors offer homes in Conwy
These are the points a surveyor will go through with you when you choose corner sliding doors for a home in Conwy:
Corner glazing changes how a Conwy home looks from neighbouring gardens, so confirm the planning position for the extension with your designer or the local planning authority before ordering.
A Conwy garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
- Daylight reaches the room from two directions, which keeps a deep extension brighter through the day as the sun moves round the house.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
- Corner systems use thermally broken aluminium sections with slim sightlines and powder-coated finishes, so the frames stay discreet on both walls.
Light and sun in Conwy
In Conwy the shortest day has roughly 7 h 30 min of daylight and the longest about 16 h 59 min. The noon sun sits near 13° above the horizon in winter and 60° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Corner sliding doors prices in Conwy
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 4.0 m | 4 panels | £10,295–£12,495 |
| 4.8 m | 4 panels | £11,495–£13,995 |
See every size on the corner sliding doors page or try the guide price tool.
How fitting works in Conwy
Surveys in the LL32 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days for the door, after 3–5 days of structural building work.
Do you need approval in Conwy?
Widening an opening in Wales means a Building Regulations application for the structural work, calculations for the beam, and a door that meets Approved Document L (Wales). Party wall notices may be needed in semi-detached and terraced homes.
Choosing the specification
- System type. Standard aluminium, slimline or lift and slide corner systems, depending on panel size and the sightlines you want.
- Panel layout. Two panels per side for smaller corners or three per side for wider ones, with fixed panels at the far ends.
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
Questions about corner sliding doors in Conwy
Do I need building approval for corner sliding doors in Conwy?
In Wales a replacement door must meet the Building Regulations as applied in Wales, arranged through a registered installer or Building Control. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Can I add a corner sliding door to an existing house?
A corner sliding door can be added to an existing house, but it is a structural project rather than a door swap: the corner of the building has to be rebuilt with engineered steel to carry the load where the post or wall used to be. It is usually done as part of an extension or rear remodel, and a survey plus an engineer's assessment confirm what the structure above needs.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.
How much do corner sliding doors cost?
Corner sliding doors start from a guide price of £8,695 for 3 m of combined width across both walls, fitted, inc VAT, at standard 2.1 m height. A 4.8 m combined corner is a guide £11,495–£13,995, and 8 m combined is around £16,495. Structural steel for the post-free corner is priced separately, and the final price is fixed in a written quote after survey.