- Postcode district
- LL32
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Llandudno, Colwyn Bay, Abergele
- Building rules
- Wales
Is a sliding door for a new opening a good fit for your home in Conwy?
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for new openings tend to work out in practice:
Turning a Conwy kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
Thinking about a wider opening in Conwy but unsure of the size? Mark it out on the wall inside and out with tape, then picture the furniture and the view before you decide.
- If the work affects a party wall, notice can be served under the Party Wall etc. Act 1996 (England and Wales) before it starts, avoiding disputes with neighbours later.
- Telling the engineer that a sliding door will sit beneath the beam lets them limit its deflection, which matters because a beam that sags can stop panels sliding freely.
- Temporary propping holds up the wall above while the masonry is cut out, keeping floors, ceilings and the roof safely supported throughout the work.
Daylight in Conwy and what it means for your glass
The midday sun over Conwy ranges from about 13° at the winter solstice to about 60° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Typical costs for sliding doors for new openings around Conwy
Use these guide prices to budget for the whole job in Conwy: the door, the steelwork, making good and the engineer's calculations, including VAT. Building Control or warrant fees are charged by the council on top.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £6,995–£7,795 |
| 3.6 m | 3 panels | £9,695–£10,895 |
| 4.8 m | 4 panels | £11,495–£12,995 |
See every size on the sliding doors for new openings page or try the guide price tool.
From survey to fitted door in Conwy
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals), and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door. If you are in Llandudno or Colwyn Bay, the same process and prices apply.
Rules for sliding doors for new openings in Wales
In Wales, structural work to form or widen an opening needs Building Regulations approval and structural calculations, and the new door must meet the Welsh energy and safety glazing requirements. The Party Wall etc. Act 1996 may apply where steelwork bears on a party wall.
Specification choices for sliding doors for new openings in Conwy
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
- Steel beam with padstones. A beam sized by the engineer to carry the wall, floors and roof above.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
Questions about sliding doors for new openings in Conwy
Do you fit sliding doors for new openings in Conwy?
Yes. We survey and fit sliding doors for new openings in Conwy and across Clwyd, including nearby Llandudno and Colwyn Bay. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much does it cost to widen an opening for sliding doors?
Our guide price for forming or widening an opening is £3,595 for 2.4 m and £4,495 for 4.8 m, covering steel, padstones, making good and structural calculations. The door is priced separately, and Building Control fees are set by your council. All figures are guide prices inc VAT, fixed in a written quote after we survey the wall and see what is above it.
Do I need building regulations to widen a door opening?
Yes, forming or widening an opening is structural work and needs a Building Regulations application in England, supported by structural calculations. Building Control inspects the work, typically including the steel and its bearings. In Scotland a building warrant is needed. Wales and Northern Ireland follow their own building regulations through local authority or district council building control.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.