- Postcode district
- TN6
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Royal Tunbridge Wells, Uckfield, Heathfield
- Building rules
- England
Are corner sliding doors right for your Crowborough home?
Here is what to weigh up if you are considering corner sliding doors for a home in Crowborough:
If you are planning a wraparound extension in Crowborough, designing corner sliding doors in from the start lets the engineer size the corner steelwork alongside the roof.
Where steel for a Crowborough corner extension would bear on a shared wall, the Party Wall etc. Act 1996 (England and Wales) may apply, so it is worth raising with neighbours early.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
- Daylight reaches the room from two directions, which keeps a deep extension brighter through the day as the sun moves round the house.
- Because panels slide rather than fold, the corner can be opened on one side only, keeping the other side closed as a wind screen on cooler days.
Planning glass for the light in Crowborough
In Crowborough the shortest day has roughly 7 h 54 min of daylight and the longest about 16 h 33 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
How much do corner sliding doors cost in Crowborough?
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 6.0 m | 6 panels | £13,395–£16,295 |
| 8.0 m | 6 panels | £16,495–£20,095 |
See every size on the corner sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Crowborough
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off), and fitting usually takes 1–2 days for the door, after 3–5 days of structural building work. If you are in Royal Tunbridge Wells or Uckfield, the same process and prices apply.
Rules for corner sliding doors in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Finishes and extras for corner sliding doors
- Threshold. Standard, low or flush thresholds, with drainage detailed along both elevations.
- Colours. Single or dual colour powder coating, so the outside can match the extension cladding or render.
- System type. Standard aluminium, slimline or lift and slide corner systems, depending on panel size and the sightlines you want.
Questions about corner sliding doors in Crowborough
How soon can you survey in Crowborough?
Surveys in the TN6 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off.
How much do corner sliding doors cost?
Corner sliding doors start from a guide price of £8,695 for 3 m of combined width across both walls, fitted, inc VAT, at standard 2.1 m height. A 4.8 m combined corner is a guide £11,495–£13,995, and 8 m combined is around £16,495. Structural steel for the post-free corner is priced separately, and the final price is fixed in a written quote after survey.
How do you maintain a corner sliding door?
Maintaining a corner sliding door is much like any aluminium slider, with extra attention to the corner: keep both tracks and the corner drainage clear, wipe the corner seals, and check the meeting panels still lock smoothly. Rollers can be adjusted if a panel drops. Because a new extension can settle slightly in its first year, the corner panels may need a small adjustment after that.
Is the open corner a weak point for security?
The corner of a corner sliding door is not a weak point when the system is properly specified, because the two meeting panels interlock and lock together, typically with multi-point hardware at the corner as well as on the sliding edges. Laminated glass adds resistance to breaking through. Corner systems are available tested to PAS 24, and the locking specification is confirmed in your quote.