- Postcode district
- SW12
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Tooting, Streatham, Clapham
- Building rules
- England
Are corner sliding doors right for your Balham home?
Here is what to weigh up if you are considering corner sliding doors for a home in Balham:
Which way does your Balham garden face? A corner catching south and west sun gains warmth in winter but can overheat in summer, so solar-control glass is worth considering.
Corner glazing changes how a Balham home looks from neighbouring gardens, so confirm the planning position for the extension with your designer or the local planning authority before ordering.
- Each elevation can have its own number of panels and its own sliding direction, letting the opening suit the shape of the garden and the furniture layout.
- With no post at the corner, sliding both sets of panels back opens the meeting point of two walls completely, so the room spills straight onto the patio.
- Because panels slide rather than fold, the corner can be opened on one side only, keeping the other side closed as a wind screen on cooler days.
Daylight in Balham and what it means for your glass
Daylight in Balham runs from about 7 h 50 min in December to 16 h 38 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do corner sliding doors cost in Balham?
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 3.6 m | 4 panels | £9,595–£11,795 |
| 4.8 m | 4 panels | £11,495–£13,995 |
See every size on the corner sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Balham
Here is the usual sequence in Balham: guide price, free survey, written quote, any building work, then manufacture (typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off). Fitting typically takes 1–2 days for the door, after 3–5 days of structural building work. Nearby, we also survey in Tooting, Streatham and Clapham.
Do you need approval in Balham?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for corner sliding doors
- System type. Standard aluminium, slimline or lift and slide corner systems, depending on panel size and the sightlines you want.
- Colours. Single or dual colour powder coating, so the outside can match the extension cladding or render.
- Panel layout. Two panels per side for smaller corners or three per side for wider ones, with fixed panels at the far ends.
Questions about corner sliding doors in Balham
Can you match other doors and windows in my Balham home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.
Can I add a corner sliding door to an existing house?
A corner sliding door can be added to an existing house, but it is a structural project rather than a door swap: the corner of the building has to be rebuilt with engineered steel to carry the load where the post or wall used to be. It is usually done as part of an extension or rear remodel, and a survey plus an engineer's assessment confirm what the structure above needs.
Do corner sliding doors lose more heat?
Corner sliding doors lose heat in proportion to their glazed area, so a large glass corner loses more than a solid wall would, but thermally broken systems keep typical whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better, and triple glazing is available. Wales, Scotland and Northern Ireland apply their own energy rules.