- Postcode district
- SW18
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Putney, Fulham, Battersea
- Building rules
- England
Are corner sliding doors right for your Wandsworth home?
Here is what to weigh up if you are considering corner sliding doors for a home in Wandsworth:
A Wandsworth garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
Corner glazing changes how a Wandsworth home looks from neighbouring gardens, so confirm the planning position for the extension with your designer or the local planning authority before ordering.
- Corner systems use thermally broken aluminium sections with slim sightlines and powder-coated finishes, so the frames stay discreet on both walls.
- When closed, the two corner panels interlock and lock together, so the glass corner stays weathertight and secure without a visible column.
- A corner of glass gives a much wider field of view than a single straight door, taking in more of the garden from a seat inside.
Daylight in Wandsworth and what it means for your glass
The midday sun over Wandsworth ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
How much do corner sliding doors cost in Wandsworth?
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 4 panels | £9,595–£11,795 |
| 4.0 m | 4 panels | £10,295–£12,495 |
| 6.0 m | 6 panels | £13,395–£16,295 |
See every size on the corner sliding doors page or try the guide price tool.
What happens when you order corner sliding doors in Wandsworth?
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off), and fitting usually takes 1–2 days for the door, after 3–5 days of structural building work. If you are in Putney or Fulham, the same process and prices apply.
Rules for corner sliding doors in England
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Specification choices for corner sliding doors in Wandsworth
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
- Panel layout. Two panels per side for smaller corners or three per side for wider ones, with fixed panels at the far ends.
- Threshold. Standard, low or flush thresholds, with drainage detailed along both elevations.
Questions about corner sliding doors in Wandsworth
Is the price different in Wandsworth?
No. Guide prices for corner sliding doors are the same across mainland Britain, including Wandsworth. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Do corner sliding doors need a steel beam?
Corner sliding doors almost always need engineered structural support, because removing the corner post takes away the support for the wall or roof above. A structural engineer designs a cantilevered beam or steel frame; the calculations are included in our guide prices and the steelwork is priced after survey. In England this needs a Building Regulations application and in Scotland a building warrant; Wales and Northern Ireland have their own building control rules.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.
How do you maintain a corner sliding door?
Maintaining a corner sliding door is much like any aluminium slider, with extra attention to the corner: keep both tracks and the corner drainage clear, wipe the corner seals, and check the meeting panels still lock smoothly. Rollers can be adjusted if a panel drops. Because a new extension can settle slightly in its first year, the corner panels may need a small adjustment after that.