- Postcode district
- RH2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Redhill, Horley, Dorking
- Building rules
- England
Corner sliding doors in Reigate: what to know
These are the points a surveyor will go through with you when you choose corner sliding doors for a home in Reigate:
On any corner installation in Reigate, the survey records floor and patio levels along both walls, because a terrace that falls differently on each side changes the threshold detail.
If you are planning a wraparound extension in Reigate, designing corner sliding doors in from the start lets the engineer size the corner steelwork alongside the roof.
- With no post at the corner, sliding both sets of panels back opens the meeting point of two walls completely, so the room spills straight onto the patio.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
- When closed, the two corner panels interlock and lock together, so the glass corner stays weathertight and secure without a visible column.
Light and sun in Reigate
Sun angles matter for big glazed doors. Around Reigate, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Guide prices for corner sliding doors in Reigate
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 3.6 m | 4 panels | £9,595–£11,795 |
| 4.0 m | 4 panels | £10,295–£12,495 |
See every size on the corner sliding doors page or try the guide price tool.
How fitting works in Reigate
A surveyor visits your Reigate home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off — and fitting usually takes 1–2 days for the door, after 3–5 days of structural building work.
Rules for corner sliding doors in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Which options matter for corner sliding doors?
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
- Panel layout. Two panels per side for smaller corners or three per side for wider ones, with fixed panels at the far ends.
- Colours. Single or dual colour powder coating, so the outside can match the extension cladding or render.
Questions about corner sliding doors in Reigate
Do you fit corner sliding doors in Reigate?
Yes. We survey and fit corner sliding doors in Reigate and across Surrey, including nearby Redhill and Horley. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Is the open corner a weak point for security?
The corner of a corner sliding door is not a weak point when the system is properly specified, because the two meeting panels interlock and lock together, typically with multi-point hardware at the corner as well as on the sliding edges. Laminated glass adds resistance to breaking through. Corner systems are available tested to PAS 24, and the locking specification is confirmed in your quote.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.
How long does a corner sliding door project take?
A corner sliding door typically takes 4–6 weeks to manufacture in standard aluminium and 6–8 weeks for slimline or lift and slide systems, from survey sign-off. The steelwork and building work usually take 3–5 days before the door goes in, and fitting the door takes 1–2 days. Engineer design and approvals come first, so the door is ordered once the steel is designed.