- Postcode district
- BN43
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Worthing, Brighton, Burgess Hill
- Building rules
- England
Are corner sliding doors right for your Shoreham-by-Sea home?
A few practical points decide whether corner sliding doors suit a particular room and opening:
Which way does your Shoreham-by-Sea garden face? A corner catching south and west sun gains warmth in winter but can overheat in summer, so solar-control glass is worth considering.
A Shoreham-by-Sea garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
- When closed, the two corner panels interlock and lock together, so the glass corner stays weathertight and secure without a visible column.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
- With no post at the corner, sliding both sets of panels back opens the meeting point of two walls completely, so the room spills straight onto the patio.
Planning glass for the light in Shoreham-by-Sea
The midday sun over Shoreham-by-Sea ranges from about 16° at the winter solstice to about 63° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
What should you budget for corner sliding doors in Shoreham-by-Sea?
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 4 panels | £9,595–£11,795 |
| 4.0 m | 4 panels | £10,295–£12,495 |
| 6.0 m | 6 panels | £13,395–£16,295 |
See every size on the corner sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Shoreham-by-Sea
A surveyor visits your Shoreham-by-Sea home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off — and fitting usually takes 1–2 days for the door, after 3–5 days of structural building work.
Rules for corner sliding doors in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Which options matter for corner sliding doors?
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
- Panel layout. Two panels per side for smaller corners or three per side for wider ones, with fixed panels at the far ends.
- Threshold. Standard, low or flush thresholds, with drainage detailed along both elevations.
Questions about corner sliding doors in Shoreham-by-Sea
Is the price different in Shoreham-by-Sea?
No. Guide prices for corner sliding doors are the same across mainland Britain, including Shoreham-by-Sea. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Is the open corner a weak point for security?
The corner of a corner sliding door is not a weak point when the system is properly specified, because the two meeting panels interlock and lock together, typically with multi-point hardware at the corner as well as on the sliding edges. Laminated glass adds resistance to breaking through. Corner systems are available tested to PAS 24, and the locking specification is confirmed in your quote.
How long does a corner sliding door project take?
A corner sliding door typically takes 4–6 weeks to manufacture in standard aluminium and 6–8 weeks for slimline or lift and slide systems, from survey sign-off. The steelwork and building work usually take 3–5 days before the door goes in, and fitting the door takes 1–2 days. Engineer design and approvals come first, so the door is ordered once the steel is designed.
Do corner sliding doors lose more heat?
Corner sliding doors lose heat in proportion to their glazed area, so a large glass corner loses more than a solid wall would, but thermally broken systems keep typical whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better, and triple glazing is available. Wales, Scotland and Northern Ireland apply their own energy rules.