- Postcode district
- BN43
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Worthing, Brighton, Burgess Hill
- Building rules
- England
Are timber and alu-clad sliding doors right for your Shoreham-by-Sea home?
Here is what to weigh up if you are considering timber and alu-clad sliding doors for a home in Shoreham-by-Sea:
If your Shoreham-by-Sea home is a period property or a barn conversion, timber and alu-clad sliding doors can bring in more light without the modern look of a metal frame.
Where the back of a Shoreham-by-Sea home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
- An alu-clad exterior shields the wood from rain and sunlight, so the outside needs only washing while the inside keeps a natural timber finish.
Sunlight, glass and orientation in Shoreham-by-Sea
Daylight in Shoreham-by-Sea runs from about 7 h 56 min in December to 16 h 31 min in June, with the noon sun at roughly 16° and 63° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
What should you budget for timber and alu-clad sliding doors in Shoreham-by-Sea?
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 3.0 m | 2 panels | £7,495–£9,095 |
| 4.0 m | 3 panels | £9,095–£11,095 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
How fitting works in Shoreham-by-Sea
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 8–10 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel swap; 1–2 days for larger doors for a door like this.
Do you need approval in Shoreham-by-Sea?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Finishes and extras for timber and alu-clad sliding doors
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
- Handles. Traditional or contemporary handles in bronze, black, satin chrome or brass-effect finishes.
Questions about timber and alu-clad sliding doors in Shoreham-by-Sea
How soon can you survey in Shoreham-by-Sea?
Surveys in the BN43 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 8–10 weeks from survey sign-off.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
What is the difference between timber and alu-clad sliding doors?
The difference is the outside face: a timber sliding door is wood inside and out, while an alu-clad door has a powder-coated aluminium shell fixed over the exterior timber. Alu-clad needs only washing outside and comes in any RAL colour; all-timber needs periodic re-coating but keeps a natural wood look on both faces. The inside is timber either way.