- Postcode district
- SN8
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Swindon, Calne, Devizes
- Building rules
- England
Are corner sliding doors right for your Marlborough home?
A few practical points decide whether corner sliding doors suit a particular room and opening:
A Marlborough garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
Which way does your Marlborough garden face? A corner catching south and west sun gains warmth in winter but can overheat in summer, so solar-control glass is worth considering.
- With no post at the corner, sliding both sets of panels back opens the meeting point of two walls completely, so the room spills straight onto the patio.
- A corner of glass gives a much wider field of view than a single straight door, taking in more of the garden from a seat inside.
- Each elevation can have its own number of panels and its own sliding direction, letting the opening suit the shape of the garden and the furniture layout.
How much sun will a door in Marlborough get?
Daylight in Marlborough runs from about 7 h 50 min in December to 16 h 37 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Corner sliding doors prices in Marlborough
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 4 panels | £9,595–£11,795 |
| 4.8 m | 4 panels | £11,495–£13,995 |
| 8.0 m | 6 panels | £16,495–£20,095 |
See every size on the corner sliding doors page or try the guide price tool.
How fitting works in Marlborough
Surveys in the SN8 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days for the door, after 3–5 days of structural building work.
Rules for corner sliding doors in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Finishes and extras for corner sliding doors
- Roof junction. Head details coordinated with flat roofs, roof lanterns or pitched roofs so steel, frame and roof meet neatly.
- Colours. Single or dual colour powder coating, so the outside can match the extension cladding or render.
- Panel layout. Two panels per side for smaller corners or three per side for wider ones, with fixed panels at the far ends.
Questions about corner sliding doors in Marlborough
Do you fit corner sliding doors in Marlborough?
Yes. We survey and fit corner sliding doors in Marlborough and across Wiltshire, including nearby Swindon and Calne. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much do corner sliding doors cost?
Corner sliding doors start from a guide price of £8,695 for 3 m of combined width across both walls, fitted, inc VAT, at standard 2.1 m height. A 4.8 m combined corner is a guide £11,495–£13,995, and 8 m combined is around £16,495. Structural steel for the post-free corner is priced separately, and the final price is fixed in a written quote after survey.
How long does a corner sliding door project take?
A corner sliding door typically takes 4–6 weeks to manufacture in standard aluminium and 6–8 weeks for slimline or lift and slide systems, from survey sign-off. The steelwork and building work usually take 3–5 days before the door goes in, and fitting the door takes 1–2 days. Engineer design and approvals come first, so the door is ordered once the steel is designed.
Do corner sliding doors need a steel beam?
Corner sliding doors almost always need engineered structural support, because removing the corner post takes away the support for the wall or roof above. A structural engineer designs a cantilevered beam or steel frame; the calculations are included in our guide prices and the steelwork is priced after survey. In England this needs a Building Regulations application and in Scotland a building warrant; Wales and Northern Ireland have their own building control rules.