- Postcode district
- EH54
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Broxburn, Bathgate, Linlithgow
- Building rules
- Scotland
Are internal glass sliding doors right for your Livingston home?
Most homeowners choosing internal glass sliding doors want the same things: more light, a clear view and a door that is easy to live with.
Converting a garage in Livingston into a playroom or office? A glazed sliding door to the hallway keeps a line of sight into the room without leaving it open to the rest of the house.
If you are extending a home in Livingston, ask your builder to allow solid fixing above any opening where you want internal glass sliding doors, before the walls are boarded.
- Because the panel slides across the wall rather than into it, there is no need to open up the wall, making installation quicker and cleaner than a pocket door.
- Every panel uses toughened or laminated safety glass, so if one is broken by accident it either crumbles into small blunt pieces or stays held together.
- Slim powder-coated aluminium frames give the look of traditional steel glazing while being far lighter, which keeps the track and wall fixings simpler.
Daylight in Livingston and what it means for your glass
Internal glazed doors are mostly about borrowed light. In Livingston, winter daylight lasts only around 6 h 58 min, so a glass door between a bright extension and a darker hallway or dining room can make a noticeable difference from November to February.
How much do internal glass sliding doors cost in Livingston?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Livingston home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.6 m | 2 panels | £2,295–£2,795 |
| 2.0 m | 2 panels | £2,595–£3,195 |
| 2.4 m | 2 panels | £2,895–£3,495 |
See every size on the internal glass sliding doors page or try the guide price tool.
From survey to fitted door in Livingston
Here is the usual sequence in Livingston: guide price, free survey, written quote, then manufacture (typically 3–5 weeks after survey sign-off). Fitting typically takes around 1 day for a single or two-panel door.
Rules for internal glass sliding doors in Scotland
In Scotland, fitting an internal sliding or pocket door is usually warrant-free; we use safety glass in glazed doors, and alterations to structural walls need a building warrant.
Choosing the specification
- Grid glazing bars. A pattern of horizontal and vertical bars for the classic factory-window look.
- Bi-parting pair. Two panels that slide apart from the centre for a wide, symmetrical opening.
- Reeded or fluted glass. Vertically ribbed glass that blurs the view through while keeping the room bright.
Questions about internal glass sliding doors in Livingston
Is the price different in Livingston?
No. Guide prices for internal glass sliding doors are the same across mainland Britain, including Livingston. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Can internal glass sliding doors go into a new extension?
Yes, and fitting them as part of an extension is often simpler, because the builder can put solid timber or a lintel above the opening for the track while the walls are open. Tell us the finished floor and ceiling heights early so the panels can be sized accurately once the plastering is done.
What are steel-look internal sliding doors?
Steel-look internal sliding doors are glass doors with slim, dark aluminium frames and glazing bars designed to resemble traditional steel windows. Aluminium is used because it is lighter, does not rust and takes a durable powder-coat finish, while still giving the narrow sightlines that make the industrial style recognisable. They slide on a top track rather than swinging open.
Can the track be fixed to a plasterboard wall?
A top track can be fitted to a plasterboard wall only if there is solid support behind it, such as a timber header or noggins, because the track carries the full weight of the glass. Where the wall cannot take it, the track can often be fixed to the ceiling joists instead. We check the construction above the opening during the survey.