Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Internal pocket doors
Internal pocket doors · PA34

Internal pocket doors in Oban

Looking at internal pocket doors in Oban? Every door is built to the measured size of your opening, fitted by installers we appoint and manage under our contract, and priced in a written quote after a free survey.

Postcode district
PA34
Survey
Free for new and replacement doors
Typical lead time
Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
Guide price
From £895 inc VAT
Nearby
Lochgilphead, Fort William, Dunoon
Building rules
Scotland

Are internal pocket doors right for your Oban home?

These are the points a surveyor will go through with you when you choose internal pocket doors for a home in Oban:

Where an Oban house has solid brick internal walls, a pocket door is still possible, but expect a new stud lining and more making good than in a timber partition.

Before arranging a survey at your Oban home, check whether the wall beside the doorway carries radiators, sockets or pipes, because those decide whether internal pocket doors will fit.

  • Top-hung rollers carry the weight of the leaf from above, so there is no floor track to trip over, clean around or catch the vacuum cleaner on.
  • The door leaf can be chosen to match the other internal doors in the house, such as painted panels, oak veneer or a glazed design, so it does not look out of place.
  • Privacy hook locks made for sliding leaves give a bathroom or en suite a door that locks from inside and can still be released from outside in an emergency.

Planning glass for the light in Oban

June 57°Dec 10°

In winter, Oban gets about 6 h 51 min of daylight against 17 h 44 min in June. Internal sliding and pocket doors help by keeping openings clear during the day and closing off rooms for warmth in the evening.

Internal pocket doors prices in Oban

These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.

Internal pocket doors prices in Oban
Overall widthTypical panelsGuide price (fitted, inc VAT)
Single pocket door1 leaf£895–£1,595
Double pocket door2 leaves£1,695–£2,795

See every size on the internal pocket doors page or try the guide price tool.

How fitting works in Oban

A surveyor checks the doorway, the wall and the floor in your Oban home and talks through the glass or door finish. After you approve the written quote, the door is made typically 3–5 weeks after survey sign-off, depending on the door leaf and finish, and fitting usually takes 1–2 days, plus drying time before new plaster can be decorated.

Do you need approval in Oban?

Internal doors do not normally need a building warrant in Scotland. We only supply safety glass for glazed doors, and any change to a structural wall would need a warrant, so we check the wall at survey.

Options to consider for your internal pocket door

  • Single pocket door. One leaf sliding into one side of the wall, the usual choice for en suites and cupboards.
  • Soft-close dampers. Hidden dampers in the track that ease the door to a gentle stop at each end.
  • Glazed leaf. A door with safety glass panels that borrows daylight from one room for another.

Questions about internal pocket doors in Oban

How soon can you survey in Oban?

Surveys in the PA34 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 3–5 weeks after survey sign-off, depending on the door leaf and finish.

Can I put a light switch on the wall with the pocket?

Not on the pocket section itself, because the door slides through that cavity and there is nowhere to run a cable or fix a back box. Switches and sockets can usually move to the other side of the doorway or to an adjoining wall. We point out any that need moving at survey, and an electrician should relocate them before the pocket frame goes in.

How long does it take to fit a pocket door?

Fitting a pocket door typically takes one to two days, depending on whether the wall is stud or masonry and how much needs opening up. New plaster then needs time to dry before it can be decorated. We agree the order of work with you at survey so other trades, such as an electrician or decorator, can be booked around it.

Are pocket doors suitable for bathrooms?

Pocket doors work well for bathrooms and en suites, particularly small ones where a swinging door clashes with a basin or toilet. A privacy hook lock with an emergency release gives you a lockable door. Bear in mind that a pocket door does not seal as tightly as a hinged door closing against stops on all sides, so a little more sound can pass through.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote