- Postcode district
- BT41
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
- Guide price
- From £895 inc VAT
- Nearby
- Ballyclare, Ballymena, Newtownabbey
- Building rules
- Northern Ireland
Why choose internal pocket doors in Antrim?
Before you settle on a door type, it helps to know what internal pocket doors do well and what to check before you order.
Renovating a period property in Antrim? Pocket doors can take panelled leaves that echo the existing doors, so the change looks considered rather than out of place.
Planning an open-plan kitchen in Antrim but still want to close it off now and then? A double pocket door gives you both.
- Soft-close dampers can slow the door in its final few centimetres in both directions, stopping it slamming shut or bouncing back out of the pocket.
- Privacy hook locks made for sliding leaves give a bathroom or en suite a door that locks from inside and can still be released from outside in an emergency.
- When the door is fully open it disappears into the wall, leaving a clear doorway that makes two connected rooms feel like one larger space.
Sunlight, glass and orientation in Antrim
Light travels further than you might expect through internal glass. When the noon sun in Antrim sits at only about 12° in December, a glazed internal door lets light from a south-facing room reach the back of the house.
Internal pocket doors prices in Antrim
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Antrim home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| Single pocket door | 1 leaf | £895–£1,595 |
| Double pocket door | 2 leaves | £1,695–£2,795 |
See every size on the internal pocket doors page or try the guide price tool.
What happens when you order internal pocket doors in Antrim?
Here is the usual sequence in Antrim: guide price, free survey, written quote, then manufacture (typically 3–5 weeks after survey sign-off, depending on the door leaf and finish). Fitting typically takes 1–2 days, plus drying time before new plaster can be decorated. Antrim is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Do you need approval in Antrim?
In Northern Ireland, internal doors are not usually building control work. We only supply safety glass for glazed doors, and structural wall changes need district council approval. Work in Northern Ireland is by arrangement.
Options to consider for your internal pocket door
- Soft-close dampers. Hidden dampers in the track that ease the door to a gentle stop at each end.
- Glazed leaf. A door with safety glass panels that borrows daylight from one room for another.
- Double pocket door. Two leaves sliding into opposite sides of the opening for a wider, centred doorway.
Questions about internal pocket doors in Antrim
Do I need building approval for internal pocket doors in Antrim?
In Northern Ireland the Building Regulations (Northern Ireland) apply through district council building control; work there is by arrangement. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
What is an internal pocket door?
An internal pocket door is an interior door that slides into a cavity built inside the wall instead of swinging on hinges. The leaf hangs from rollers on a concealed track at the top of a pocket frame, and the frame is boarded and plastered so the wall looks normal. When the door is open, only its edge and pull remain visible.
How long does it take to fit a pocket door?
Fitting a pocket door typically takes one to two days, depending on whether the wall is stud or masonry and how much needs opening up. New plaster then needs time to dry before it can be decorated. We agree the order of work with you at survey so other trades, such as an electrician or decorator, can be booked around it.
Can a pocket door be fitted into an existing wall?
Yes, a pocket door can usually be fitted into an existing wall, but it involves opening up the wall beside the doorway. In a stud partition we remove the plasterboard, fit the pocket frame and board it again. In a masonry wall the usual approach is a new stud lining, and if the wall is load-bearing, forming the pocket becomes structural work that needs proper assessment and approval first.