- Postcode district
- BT43
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
- Guide price
- From £895 inc VAT
- Nearby
- Antrim, Ballyclare, Magherafelt
- Building rules
- Northern Ireland
Internal pocket doors in Ballymena: what to know
Before you settle on a door type, it helps to know what internal pocket doors do well and what to check before you order.
Where a Ballymena house has solid brick internal walls, a pocket door is still possible, but expect a new stud lining and more making good than in a timber partition.
If your Ballymena home has a cramped en suite where the door clashes with the basin, a pocket door is worth measuring for before you consider moving the sanitaryware.
- A double pocket door, with two leaves parting from the centre, opens up a wide doorway between a kitchen and a living area without any doors standing in the room.
- Flush pulls sit level with the face of the door so the leaf can slide fully into the pocket, with a small edge pull to draw it back out again.
- Privacy hook locks made for sliding leaves give a bathroom or en suite a door that locks from inside and can still be released from outside in an emergency.
Daylight in Ballymena and what it means for your glass
Light travels further than you might expect through internal glass. When the noon sun in Ballymena sits at only about 12° in December, a glazed internal door lets light from a south-facing room reach the back of the house.
Guide prices for internal pocket doors in Ballymena
Guide prices are the same across County Antrim. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| Single pocket door | 1 leaf | £895–£1,595 |
| Double pocket door | 2 leaves | £1,695–£2,795 |
See every size on the internal pocket doors page or try the guide price tool.
How fitting works in Ballymena
Surveys in the BT43 district are booked at a time that suits you. Lead time is typically 3–5 weeks after survey sign-off, depending on the door leaf and finish; on fitting day the track or pocket is installed, the door is hung and adjusted, and the area is left clean. Fitting usually takes 1–2 days, plus drying time before new plaster can be decorated. Ballymena is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Rules for internal pocket doors in Northern Ireland
Internal door work in Northern Ireland is by arrangement. We use safety glass in glazed doors, and any alteration to a load-bearing wall needs building control approval from your district council.
Finishes and extras for internal pocket doors
- Glazed leaf. A door with safety glass panels that borrows daylight from one room for another.
- Soft-close dampers. Hidden dampers in the track that ease the door to a gentle stop at each end.
- Bathroom privacy lock. A hook lock with an emergency release, designed for doors that slide rather than swing.
Questions about internal pocket doors in Ballymena
Do I need building approval for internal pocket doors in Ballymena?
In Northern Ireland the Building Regulations (Northern Ireland) apply through district council building control; work there is by arrangement. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Can a pocket door be fitted into an existing wall?
Yes, a pocket door can usually be fitted into an existing wall, but it involves opening up the wall beside the doorway. In a stud partition we remove the plasterboard, fit the pocket frame and board it again. In a masonry wall the usual approach is a new stud lining, and if the wall is load-bearing, forming the pocket becomes structural work that needs proper assessment and approval first.
What is an internal pocket door?
An internal pocket door is an interior door that slides into a cavity built inside the wall instead of swinging on hinges. The leaf hangs from rollers on a concealed track at the top of a pocket frame, and the frame is boarded and plastered so the wall looks normal. When the door is open, only its edge and pull remain visible.
How long does it take to fit a pocket door?
Fitting a pocket door typically takes one to two days, depending on whether the wall is stud or masonry and how much needs opening up. New plaster then needs time to dry before it can be decorated. We agree the order of work with you at survey so other trades, such as an electrician or decorator, can be booked around it.