Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Internal pocket doors
Internal pocket doors · SE10

Internal pocket doors in Greenwich

Internal pocket doors for homes in Greenwich, made to measure and fitted. We survey openings in the SE10 postcode district and across Greater London, and the price is fixed in writing before anything is ordered.

Postcode district
SE10
Survey
Free for new and replacement doors
Typical lead time
Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
Guide price
From £895 inc VAT
Nearby
Blackheath, Lewisham, Catford
Building rules
England

Is an internal pocket door a good fit for your home in Greenwich?

These are the points a surveyor will go through with you when you choose internal pocket doors for a home in Greenwich:

If your Greenwich home has a cramped en suite where the door clashes with the basin, a pocket door is worth measuring for before you consider moving the sanitaryware.

Where a Greenwich house has solid brick internal walls, a pocket door is still possible, but expect a new stud lining and more making good than in a timber partition.

  • Soft-close dampers can slow the door in its final few centimetres in both directions, stopping it slamming shut or bouncing back out of the pocket.
  • Privacy hook locks made for sliding leaves give a bathroom or en suite a door that locks from inside and can still be released from outside in an emergency.
  • When the door is fully open it disappears into the wall, leaving a clear doorway that makes two connected rooms feel like one larger space.

Light and sun in Greenwich

June 62°Dec 15°

Internal glazed doors are mostly about borrowed light. In Greenwich, winter daylight lasts only around 7 h 50 min, so a glass door between a bright extension and a darker hallway or dining room can make a noticeable difference from November to February.

How much do internal pocket doors cost in Greenwich?

The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Greenwich home has been measured.

How much do internal pocket doors cost in Greenwich?
Overall widthTypical panelsGuide price (fitted, inc VAT)
Single pocket door1 leaf£895–£1,595
Double pocket door2 leaves£1,695–£2,795

See every size on the internal pocket doors page or try the guide price tool.

Survey, manufacture and fitting around Greenwich

A surveyor checks the doorway, the wall and the floor in your Greenwich home and talks through the glass or door finish. After you approve the written quote, the door is made typically 3–5 weeks after survey sign-off, depending on the door leaf and finish, and fitting usually takes 1–2 days, plus drying time before new plaster can be decorated.

Do you need approval in Greenwich?

Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.

Choosing the specification

  • Flush and edge pulls. Recessed pulls in the door face plus an edge pull, so the leaf can disappear fully into the pocket.
  • Double pocket door. Two leaves sliding into opposite sides of the opening for a wider, centred doorway.
  • Bathroom privacy lock. A hook lock with an emergency release, designed for doors that slide rather than swing.

Questions about internal pocket doors in Greenwich

Do you fit internal pocket doors in Greenwich?

Yes. We survey and fit internal pocket doors in Greenwich and across Greater London, including nearby Blackheath and Lewisham. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.

Can I put a light switch on the wall with the pocket?

Not on the pocket section itself, because the door slides through that cavity and there is nowhere to run a cable or fix a back box. Switches and sockets can usually move to the other side of the doorway or to an adjoining wall. We point out any that need moving at survey, and an electrician should relocate them before the pocket frame goes in.

How long does it take to fit a pocket door?

Fitting a pocket door typically takes one to two days, depending on whether the wall is stud or masonry and how much needs opening up. New plaster then needs time to dry before it can be decorated. We agree the order of work with you at survey so other trades, such as an electrician or decorator, can be booked around it.

Are pocket doors suitable for bathrooms?

Pocket doors work well for bathrooms and en suites, particularly small ones where a swinging door clashes with a basin or toilet. A privacy hook lock with an emergency release gives you a lockable door. Bear in mind that a pocket door does not seal as tightly as a hinged door closing against stops on all sides, so a little more sound can pass through.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote