Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Internal pocket doors
Internal pocket doors · SE18

Internal pocket doors in Woolwich

Planning internal pocket doors for a home in Woolwich? We measure, make and fit to your opening across Greater London, with Building Regulations compliance arranged and the certificate sent to you.

Postcode district
SE18
Survey
Free for new and replacement doors
Typical lead time
Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
Guide price
From £895 inc VAT
Nearby
Eltham, Blackheath, Barking
Building rules
England

Are internal pocket doors right for your Woolwich home?

The right door depends on the opening, the room and the way you use the garden. Here is how internal pocket doors tend to work out in practice:

Planning an open-plan kitchen in Woolwich but still want to close it off now and then? A double pocket door gives you both.

Where a Woolwich house has solid brick internal walls, a pocket door is still possible, but expect a new stud lining and more making good than in a timber partition.

  • A double pocket door, with two leaves parting from the centre, opens up a wide doorway between a kitchen and a living area without any doors standing in the room.
  • Privacy hook locks made for sliding leaves give a bathroom or en suite a door that locks from inside and can still be released from outside in an emergency.
  • Soft-close dampers can slow the door in its final few centimetres in both directions, stopping it slamming shut or bouncing back out of the pocket.

Daylight in Woolwich and what it means for your glass

June 62°Dec 15°

Internal glazed doors are mostly about borrowed light. In Woolwich, winter daylight lasts only around 7 h 50 min, so a glass door between a bright extension and a darker hallway or dining room can make a noticeable difference from November to February.

Guide prices for internal pocket doors in Woolwich

These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.

Guide prices for internal pocket doors in Woolwich
Overall widthTypical panelsGuide price (fitted, inc VAT)
Single pocket door1 leaf£895–£1,595
Double pocket door2 leaves£1,695–£2,795

See every size on the internal pocket doors page or try the guide price tool.

Survey, manufacture and fitting around Woolwich

A surveyor checks the doorway, the wall and the floor in your Woolwich home and talks through the glass or door finish. After you approve the written quote, the door is made typically 3–5 weeks after survey sign-off, depending on the door leaf and finish, and fitting usually takes 1–2 days, plus drying time before new plaster can be decorated.

Do you need approval in Woolwich?

Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.

Specification choices for internal pocket doors in Woolwich

  • Flush and edge pulls. Recessed pulls in the door face plus an edge pull, so the leaf can disappear fully into the pocket.
  • Bathroom privacy lock. A hook lock with an emergency release, designed for doors that slide rather than swing.
  • Double pocket door. Two leaves sliding into opposite sides of the opening for a wider, centred doorway.

Questions about internal pocket doors in Woolwich

Do you fit internal pocket doors in Woolwich?

Yes. We survey and fit internal pocket doors in Woolwich and across Greater London, including nearby Eltham and Blackheath. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.

Can a pocket door be fitted into an existing wall?

Yes, a pocket door can usually be fitted into an existing wall, but it involves opening up the wall beside the doorway. In a stud partition we remove the plasterboard, fit the pocket frame and board it again. In a masonry wall the usual approach is a new stud lining, and if the wall is load-bearing, forming the pocket becomes structural work that needs proper assessment and approval first.

How long does it take to fit a pocket door?

Fitting a pocket door typically takes one to two days, depending on whether the wall is stud or masonry and how much needs opening up. New plaster then needs time to dry before it can be decorated. We agree the order of work with you at survey so other trades, such as an electrician or decorator, can be booked around it.

Are pocket doors suitable for bathrooms?

Pocket doors work well for bathrooms and en suites, particularly small ones where a swinging door clashes with a basin or toilet. A privacy hook lock with an emergency release gives you a lockable door. Bear in mind that a pocket door does not seal as tightly as a hinged door closing against stops on all sides, so a little more sound can pass through.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote