Internal pocket doors across Gwynedd
Most homeowners choosing internal pocket doors want the same things: more light, a clear view and a door that is easy to live with.
Where a Gwynedd house has solid brick internal walls, a pocket door is still possible, but expect a new stud lining and more making good than in a timber partition.
In a Gwynedd hallway where three or four doors open into the same small space, swapping one or two for pocket doors can stop them colliding with each other.
- When the door is fully open it disappears into the wall, leaving a clear doorway that makes two connected rooms feel like one larger space.
- Top-hung rollers carry the weight of the leaf from above, so there is no floor track to trip over, clean around or catch the vacuum cleaner on.
- A double pocket door, with two leaves parting from the centre, opens up a wide doorway between a kitchen and a living area without any doors standing in the room.
Guide prices for internal pocket doors in Gwynedd
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| Single pocket door | 1 leaf | £895–£1,595 |
| Double pocket door | 2 leaves | £1,695–£2,795 |
Every size is on the internal pocket doors page.
Daylight and glass in Gwynedd
With roughly 7 h 33 min of daylight on the shortest day in Gwynedd, rooms in the middle of a house can feel gloomy in winter. A glazed internal door shares light from the brightest room without losing the separation of a closed door.
Towns we cover in Gwynedd
We survey and fit internal pocket doors in 9 towns across Gwynedd, including the LL23, LL40, LL49, LL53, LL55, LL57 postcode districts.
Approvals in Wales
Internal sliding and pocket doors are not usually notifiable building work in Wales. We only supply safety glass for glazed doors, and any alteration to a load-bearing wall needs structural advice and approval from Building Control.
Questions about internal pocket doors in Gwynedd
Do I need building approval for internal pocket doors in Gwynedd?
In Wales a replacement door must meet the Building Regulations as applied in Wales, arranged through a registered installer or Building Control. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How much wall space does a pocket door need?
A pocket door needs a length of clear wall beside the opening that is roughly the width of the door, plus a little extra for the frame. A double pocket door needs that space on both sides. The pocket section must be free of radiators, sockets, switches, pipes and cables, which is often the deciding factor in whether a particular doorway works.
Can I put a light switch on the wall with the pocket?
Not on the pocket section itself, because the door slides through that cavity and there is nowhere to run a cable or fix a back box. Switches and sockets can usually move to the other side of the doorway or to an adjoining wall. We point out any that need moving at survey, and an electrician should relocate them before the pocket frame goes in.
How long does it take to fit a pocket door?
Fitting a pocket door typically takes one to two days, depending on whether the wall is stud or masonry and how much needs opening up. New plaster then needs time to dry before it can be decorated. We agree the order of work with you at survey so other trades, such as an electrician or decorator, can be booked around it.