Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Internal pocket doors
Internal pocket doors · PH15

Internal pocket doors in Aberfeldy

Internal pocket doors for homes in Aberfeldy, made to measure and fitted. We survey openings in the PH15 postcode district and across Perth and Kinross, and the price is fixed in writing before anything is ordered.

Postcode district
PH15
Survey
Free for new and replacement doors
Typical lead time
Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
Guide price
From £895 inc VAT
Nearby
Pitlochry, Crieff, Blairgowrie
Building rules
Scotland

Why choose internal pocket doors in Aberfeldy?

Here is what to weigh up if you are considering internal pocket doors for a home in Aberfeldy:

In an Aberfeldy hallway where three or four doors open into the same small space, swapping one or two for pocket doors can stop them colliding with each other.

If your Aberfeldy home has a cramped en suite where the door clashes with the basin, a pocket door is worth measuring for before you consider moving the sanitaryware.

  • The door leaf can be chosen to match the other internal doors in the house, such as painted panels, oak veneer or a glazed design, so it does not look out of place.
  • Soft-close dampers can slow the door in its final few centimetres in both directions, stopping it slamming shut or bouncing back out of the pocket.
  • Flush pulls sit level with the face of the door so the leaf can slide fully into the pocket, with a small edge pull to draw it back out again.

Light and sun in Aberfeldy

June 57°Dec 10°

Light travels further than you might expect through internal glass. When the noon sun in Aberfeldy sits at only about 10° in December, a glazed internal door lets light from a south-facing room reach the back of the house.

What should you budget for internal pocket doors in Aberfeldy?

The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Aberfeldy home has been measured.

What should you budget for internal pocket doors in Aberfeldy?
Overall widthTypical panelsGuide price (fitted, inc VAT)
Single pocket door1 leaf£895–£1,595
Double pocket door2 leaves£1,695–£2,795

See every size on the internal pocket doors page or try the guide price tool.

How fitting works in Aberfeldy

Here is the usual sequence in Aberfeldy: guide price, free survey, written quote, then manufacture (typically 3–5 weeks after survey sign-off, depending on the door leaf and finish). Fitting typically takes 1–2 days, plus drying time before new plaster can be decorated.

Do you need approval in Aberfeldy?

In Scotland, fitting an internal sliding or pocket door is usually warrant-free; we use safety glass in glazed doors, and alterations to structural walls need a building warrant.

Specification choices for internal pocket doors in Aberfeldy

  • Bathroom privacy lock. A hook lock with an emergency release, designed for doors that slide rather than swing.
  • Glazed leaf. A door with safety glass panels that borrows daylight from one room for another.
  • Double pocket door. Two leaves sliding into opposite sides of the opening for a wider, centred doorway.

Questions about internal pocket doors in Aberfeldy

Can you match other doors and windows in my Aberfeldy home?

Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.

Do pocket doors need a floor track?

No, the pocket doors we fit hang from rollers on a top track, so the floor stays clear and level through the doorway. A small guide at the mouth of the pocket keeps the leaf running straight without a groove across the floor. That makes them easy to clean around and suitable where the same flooring runs from room to room.

How much wall space does a pocket door need?

A pocket door needs a length of clear wall beside the opening that is roughly the width of the door, plus a little extra for the frame. A double pocket door needs that space on both sides. The pocket section must be free of radiators, sockets, switches, pipes and cables, which is often the deciding factor in whether a particular doorway works.

How long does it take to fit a pocket door?

Fitting a pocket door typically takes one to two days, depending on whether the wall is stud or masonry and how much needs opening up. New plaster then needs time to dry before it can be decorated. We agree the order of work with you at survey so other trades, such as an electrician or decorator, can be booked around it.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote