Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Internal pocket doors
Internal pocket doors · PA4

Internal pocket doors in Renfrew

We supply and fit internal pocket doors in Renfrew and the surrounding PA4 area. Start with a guide price online, then a surveyor measures the opening and confirms the specification before you commit.

Postcode district
PA4
Survey
Free for new and replacement doors
Typical lead time
Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
Guide price
From £895 inc VAT
Nearby
Clydebank, Erskine, Paisley
Building rules
Scotland

Why choose internal pocket doors in Renfrew?

These are the points a surveyor will go through with you when you choose internal pocket doors for a home in Renfrew:

If your Renfrew home has a cramped en suite where the door clashes with the basin, a pocket door is worth measuring for before you consider moving the sanitaryware.

In a Renfrew hallway where three or four doors open into the same small space, swapping one or two for pocket doors can stop them colliding with each other.

  • The door leaf can be chosen to match the other internal doors in the house, such as painted panels, oak veneer or a glazed design, so it does not look out of place.
  • When the door is fully open it disappears into the wall, leaving a clear doorway that makes two connected rooms feel like one larger space.
  • Soft-close dampers can slow the door in its final few centimetres in both directions, stopping it slamming shut or bouncing back out of the pocket.

Daylight in Renfrew and what it means for your glass

June 58°Dec 11°

In winter, Renfrew gets about 6 h 58 min of daylight against 17 h 35 min in June. Internal sliding and pocket doors help by keeping openings clear during the day and closing off rooms for warmth in the evening.

How much do internal pocket doors cost in Renfrew?

The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Renfrew home has been measured.

How much do internal pocket doors cost in Renfrew?
Overall widthTypical panelsGuide price (fitted, inc VAT)
Single pocket door1 leaf£895–£1,595
Double pocket door2 leaves£1,695–£2,795

See every size on the internal pocket doors page or try the guide price tool.

What happens when you order internal pocket doors in Renfrew?

Surveys in the PA4 district are booked at a time that suits you. Lead time is typically 3–5 weeks after survey sign-off, depending on the door leaf and finish; on fitting day the track or pocket is installed, the door is hung and adjusted, and the area is left clean. Fitting usually takes 1–2 days, plus drying time before new plaster can be decorated.

Do you need approval in Renfrew?

Internal doors do not normally need a building warrant in Scotland. We only supply safety glass for glazed doors, and any change to a structural wall would need a warrant, so we check the wall at survey.

Choosing the specification

  • Bathroom privacy lock. A hook lock with an emergency release, designed for doors that slide rather than swing.
  • Single pocket door. One leaf sliding into one side of the wall, the usual choice for en suites and cupboards.
  • Soft-close dampers. Hidden dampers in the track that ease the door to a gentle stop at each end.

Questions about internal pocket doors in Renfrew

Do I need building approval for internal pocket doors in Renfrew?

In Scotland a like-for-like replacement door usually needs no building warrant, but must meet the building standards; new openings need a warrant. We confirm the right route for your property at survey, so the paperwork is in place before fitting.

Can I put a light switch on the wall with the pocket?

Not on the pocket section itself, because the door slides through that cavity and there is nowhere to run a cable or fix a back box. Switches and sockets can usually move to the other side of the doorway or to an adjoining wall. We point out any that need moving at survey, and an electrician should relocate them before the pocket frame goes in.

How long does it take to fit a pocket door?

Fitting a pocket door typically takes one to two days, depending on whether the wall is stud or masonry and how much needs opening up. New plaster then needs time to dry before it can be decorated. We agree the order of work with you at survey so other trades, such as an electrician or decorator, can be booked around it.

Are pocket doors suitable for bathrooms?

Pocket doors work well for bathrooms and en suites, particularly small ones where a swinging door clashes with a basin or toilet. A privacy hook lock with an emergency release gives you a lockable door. Bear in mind that a pocket door does not seal as tightly as a hinged door closing against stops on all sides, so a little more sound can pass through.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote