Internal pocket doors across Warwickshire
These are the points a surveyor will go through with you when you choose internal pocket doors for a home in Warwickshire:
Where a Warwickshire house has solid brick internal walls, a pocket door is still possible, but expect a new stud lining and more making good than in a timber partition.
If your Warwickshire home has a cramped en suite where the door clashes with the basin, a pocket door is worth measuring for before you consider moving the sanitaryware.
- Privacy hook locks made for sliding leaves give a bathroom or en suite a door that locks from inside and can still be released from outside in an emergency.
- A double pocket door, with two leaves parting from the centre, opens up a wide doorway between a kitchen and a living area without any doors standing in the room.
- Top-hung rollers carry the weight of the leaf from above, so there is no floor track to trip over, clean around or catch the vacuum cleaner on.
Guide prices for internal pocket doors in Warwickshire
Guide prices are the same across Warwickshire. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| Single pocket door | 1 leaf | £895–£1,595 |
| Double pocket door | 2 leaves | £1,695–£2,795 |
Every size is on the internal pocket doors page.
Daylight and glass in Warwickshire
Light travels further than you might expect through internal glass. When the noon sun in Warwickshire sits at only about 14° in December, a glazed internal door lets light from a south-facing room reach the back of the house.
Towns we cover in Warwickshire
We survey and fit internal pocket doors in 10 towns across Warwickshire, including the B49, CV11, CV12, CV21, CV31, CV34 postcode districts.
Approvals in England
Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.
Questions about internal pocket doors in Warwickshire
Do you fit internal pocket doors in Warwickshire?
Yes. We survey and fit internal pocket doors in Warwickshire and across Warwickshire, including Nuneaton and Rugby. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Do pocket doors need a floor track?
No, the pocket doors we fit hang from rollers on a top track, so the floor stays clear and level through the doorway. A small guide at the mouth of the pocket keeps the leaf running straight without a groove across the floor. That makes them easy to clean around and suitable where the same flooring runs from room to room.
Can a pocket door be fitted into an existing wall?
Yes, a pocket door can usually be fitted into an existing wall, but it involves opening up the wall beside the doorway. In a stud partition we remove the plasterboard, fit the pocket frame and board it again. In a masonry wall the usual approach is a new stud lining, and if the wall is load-bearing, forming the pocket becomes structural work that needs proper assessment and approval first.
What is an internal pocket door?
An internal pocket door is an interior door that slides into a cavity built inside the wall instead of swinging on hinges. The leaf hangs from rollers on a concealed track at the top of a pocket frame, and the frame is boarded and plastered so the wall looks normal. When the door is open, only its edge and pull remain visible.