- Postcode district
- DD1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Monifieth, Cupar, Carnoustie
- Building rules
- Scotland
Lift and slide doors in Dundee: what to know
These are the points a surveyor will go through with you when you choose lift and slide doors for a home in Dundee:
If rear access to your Dundee property is tight, the survey plans how panels weighing several hundred kilograms will be delivered and lifted into place.
Before lift and slide doors are ordered for a Dundee extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
- Larger panels mean fewer interlocks across a wide opening, so a door of four to six metres can be made in just two or three sections.
- Turning the handle raises the panel clear of its gaskets before it moves, so the seals are not scuffed along the frame and keep their shape for longer.
Daylight in Dundee and what it means for your glass
In Dundee the shortest day has roughly 6 h 50 min of daylight and the longest about 17 h 45 min. The noon sun sits near 10° above the horizon in winter and 57° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Lift and slide doors prices in Dundee
Pricing is transparent and does not change because you are in Dundee. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 4.0 m | 2 panels | £10,395–£12,695 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
Timescales for lift and slide doors in Dundee
A surveyor visits your Dundee home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 6–8 weeks from survey sign-off — and fitting usually takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. We also cover Monifieth (10 km east) and Cupar (17 km south).
Rules for lift and slide doors in Scotland
In Scotland, replacing a door like for like in a house does not usually need a building warrant, but the new door must still meet the Scottish building standards for energy and safety. Forming or widening an opening is different: that needs a building warrant from the council before work starts.
Specification choices for lift and slide doors in Dundee
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Material. Thermally broken aluminium, or timber and alu-clad timber lift and slide systems for a warmer interior look.
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
Questions about lift and slide doors in Dundee
Is the price different in Dundee?
No. Guide prices for lift and slide doors are the same across mainland Britain, including Dundee. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.
Are lift and slide doors secure?
Lift and slide doors are secure when specified with multi-point locking and laminated glass, because the lowered panel sits on the frame and the locks engage as it drops. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets, and a key-locking handle can be added. The sheer weight of the panel also makes forcing it out of the track much harder.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.