- Postcode district
- CH7
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Buckley, Connah's Quay, Deeside
- Building rules
- Wales
Why choose lift and slide doors in Mold?
These are the points a surveyor will go through with you when you choose lift and slide doors for a home in Mold:
Comparing lift and slide with slimline for a Mold project usually comes down to one question: do panel size and sealing matter more to you than the narrowest possible interlock?
If your Mold home has an exposed elevation that takes driving rain, the compressed seals of lift and slide doors give a tighter closure than brush-sealed sliders.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
- Geared lifting hardware lets one person move a panel weighing several hundred kilograms with a gentle push, which ordinary sliding rollers could not manage.
- Turning the handle raises the panel clear of its gaskets before it moves, so the seals are not scuffed along the frame and keep their shape for longer.
Planning glass for the light in Mold
The midday sun over Mold ranges from about 13° at the winter solstice to about 60° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Lift and slide doors prices in Mold
Guide prices are the same across Clwyd: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.6 m | 2 panels | £9,695–£11,795 |
| 4.0 m | 2 panels | £10,395–£12,695 |
See every size on the lift and slide doors page or try the guide price tool.
How fitting works in Mold
Here is the usual sequence in Mold: guide price, free survey, written quote, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. Nearby, we also survey in Buckley, Connah's Quay and Deeside.
Rules for lift and slide doors in Wales
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Specification choices for lift and slide doors in Mold
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Handle. A long lever handle sized for the lifting gear, in a finish to match the frame, with a key-locking option.
Questions about lift and slide doors in Mold
Can you match other doors and windows in my Mold home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.
Are lift and slide doors secure?
Lift and slide doors are secure when specified with multi-point locking and laminated glass, because the lowered panel sits on the frame and the locks engage as it drops. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets, and a key-locking handle can be added. The sheer weight of the panel also makes forcing it out of the track much harder.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.