Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Lift and slide doors
Lift and slide doors · LL13

Lift and slide doors in Wrexham

Looking at lift and slide doors in Wrexham? Every door is built to the measured size of your opening, fitted by installers we appoint and manage under our contract, and priced in a written quote after a free survey.

Postcode district
LL13
Survey
Free for new and replacement doors
Typical lead time
Typically 6–8 weeks from survey sign-off
Guide price
From £7,495 inc VAT
Nearby
Rhosllannerchrugog, Buckley, Llangollen
Building rules
Wales

Is a lift and slide door a good fit for your home in Wrexham?

A few practical points decide whether lift and slide doors suit a particular room and opening:

If your Wrexham home has an exposed elevation that takes driving rain, the compressed seals of lift and slide doors give a tighter closure than brush-sealed sliders.

Planning a terrace door wider than about 4 m in Wrexham? Lift and slide hardware lets each panel be larger, so the opening needs fewer interlocks.

  • Deep, thermally broken frames carry thick triple glazed units where needed, with typical whole-door U-values around 0.8–1.1 W/m²K at that specification.
  • Geared lifting hardware lets one person move a panel weighing several hundred kilograms with a gentle push, which ordinary sliding rollers could not manage.
  • A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.

How much sun will a door in Wrexham get?

June 60°Dec 14°

Because Wrexham sees long summer days (about 16 h 57 min) and short winter ones (about 7 h 33 min), the elevation your door faces makes a real difference. With the midday sun at about 14° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.

Typical costs for lift and slide doors around Wrexham

These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.

Typical costs for lift and slide doors around Wrexham
Overall widthTypical panelsGuide price (fitted, inc VAT)
2.4 m2 panels£7,495–£9,195
4.0 m2 panels£10,395–£12,695
6.0 m3 panels£13,995–£16,995

See every size on the lift and slide doors page or try the guide price tool.

What happens when you order lift and slide doors in Wrexham?

Here is the usual sequence in Wrexham: guide price, free survey, written quote, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. Nearby, we also survey in Rhosllannerchrugog, Buckley and Llangollen.

Rules for lift and slide doors in Wales

In Wales, replacement doors are covered by the Building Regulations as applied in Wales, including the Welsh Part L energy requirements and safety glazing rules. Compliance is arranged through a competent person scheme installer or your council's Building Control, and the certificate is kept with your property records.

Specification choices for lift and slide doors in Wrexham

  • Glass. Double or triple glazed safety glass, with acoustic laminated or solar-control units for exposed or noisy sites.
  • Handle. A long lever handle sized for the lifting gear, in a finish to match the frame, with a key-locking option.
  • Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.

Questions about lift and slide doors in Wrexham

Is the price different in Wrexham?

No. Guide prices for lift and slide doors are the same across mainland Britain, including Wrexham. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.

What is the lead time for a lift and slide door?

A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.

How much is a lift and slide door?

A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.

How heavy and wide can lift and slide panels be?

Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote