- Postcode district
- EX17
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Exeter, Tiverton, Okehampton
- Building rules
- England
Why choose lift and slide doors in Crediton?
Here is what to weigh up if you are considering lift and slide doors for a home in Crediton:
Before lift and slide doors are ordered for a Crediton extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
If your Crediton home has an exposed elevation that takes driving rain, the compressed seals of lift and slide doors give a tighter closure than brush-sealed sliders.
- Larger panels mean fewer interlocks across a wide opening, so a door of four to six metres can be made in just two or three sections.
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
- Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.
Sunlight, glass and orientation in Crediton
Because Crediton sees long summer days (about 16 h 30 min) and short winter ones (about 7 h 57 min), the elevation your door faces makes a real difference. With the midday sun at about 16° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Typical costs for lift and slide doors around Crediton
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Crediton home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 4.8 m | 3 panels | £11,795–£14,395 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
What happens when you order lift and slide doors in Crediton?
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Do you need approval in Crediton?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for lift and slide doors
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
Questions about lift and slide doors in Crediton
Is the price different in Crediton?
No. Guide prices for lift and slide doors are the same across mainland Britain, including Crediton. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.
Will I need Building Regulations approval for a large lift and slide door?
A large lift and slide door often needs Building Regulations approval for the structural work, because forming or widening an opening in England needs an application, structural calculations and usually a steel beam. The door itself is a controlled fitting, installed by a competent person scheme installer or notified to Building Control, with safety glazing throughout. Scotland needs a building warrant for a new or wider opening; Wales and Northern Ireland have their own rules.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.