- Postcode district
- EX14
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Sidmouth, Chard, Tiverton
- Building rules
- England
Are lift and slide doors right for your Honiton home?
Most homeowners choosing lift and slide doors want the same things: more light, a clear view and a door that is easy to live with.
Before lift and slide doors are ordered for a Honiton extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
When you want a door left a hand's width open on a breezy day in Honiton, a lowered lift and slide panel stays exactly where it is set.
- Larger panels mean fewer interlocks across a wide opening, so a door of four to six metres can be made in just two or three sections.
- Low thresholds of around 15–25 mm, or a flush finish with external drainage, are possible on many systems, so even a heavy door can give level access to a terrace.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
How much sun will a door in Honiton get?
Daylight in Honiton runs from about 7 h 57 min in December to 16 h 31 min in June, with the noon sun at roughly 16° and 63° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do lift and slide doors cost in Honiton?
Guide prices are the same across Devon: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 4.0 m | 2 panels | £10,395–£12,695 |
| 4.8 m | 3 panels | £11,795–£14,395 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
Survey, manufacture and fitting around Honiton
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Do you need approval in Honiton?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Choosing the specification
- Glass. Double or triple glazed safety glass, with acoustic laminated or solar-control units for exposed or noisy sites.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
Questions about lift and slide doors in Honiton
Do I need building approval for lift and slide doors in Honiton?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Do lift and slide doors need servicing?
Lift and slide doors need light, regular care rather than heavy servicing: keep the track and drainage clear, wipe the gaskets with a damp cloth, and check the handle gear runs smoothly once a year. Because the seals are not dragged during opening, they wear slowly. If a panel ever drops unevenly, the rollers and lifting gear can be adjusted, and a worn gasket can be replaced on its own without changing the panel.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.
Are lift and slide doors more weathertight than standard sliders?
Lift and slide doors are generally more weathertight than standard inline sliders, because the panel's weight compresses firm gaskets when closed instead of relying on brush seals it rubs past. Typical whole-door U-values are around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed. In England, a door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better; Wales, Scotland and Northern Ireland have their own rules.