- Postcode district
- BH15
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Bournemouth, Wimborne Minster, Wareham
- Building rules
- England
Are lift and slide doors right for your Poole home?
A few practical points decide whether lift and slide doors suit a particular room and opening:
When you want a door left a hand's width open on a breezy day in Poole, a lowered lift and slide panel stays exactly where it is set.
If rear access to your Poole property is tight, the survey plans how panels weighing several hundred kilograms will be delivered and lifted into place.
- Larger panels mean fewer interlocks across a wide opening, so a door of four to six metres can be made in just two or three sections.
- Geared lifting hardware lets one person move a panel weighing several hundred kilograms with a gentle push, which ordinary sliding rollers could not manage.
- Low thresholds of around 15–25 mm, or a flush finish with external drainage, are possible on many systems, so even a heavy door can give level access to a terrace.
Sunlight, glass and orientation in Poole
Daylight in Poole runs from about 7 h 57 min in December to 16 h 30 min in June, with the noon sun at roughly 16° and 63° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Guide prices for lift and slide doors in Poole
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 4.8 m | 3 panels | £11,795–£14,395 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
Survey, manufacture and fitting around Poole
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Rules for lift and slide doors in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Choosing the specification
- Material. Thermally broken aluminium, or timber and alu-clad timber lift and slide systems for a warmer interior look.
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
Questions about lift and slide doors in Poole
Can you match other doors and windows in my Poole home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.