- Postcode district
- SA72
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Milford Haven, Haverfordwest, Tenby
- Building rules
- Wales
Are lift and slide doors right for your Pembroke Dock home?
Here is what to weigh up if you are considering lift and slide doors for a home in Pembroke Dock:
Planning a terrace door wider than about 4 m in Pembroke Dock? Lift and slide hardware lets each panel be larger, so the opening needs fewer interlocks.
Before lift and slide doors are ordered for a Pembroke Dock extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
- Larger panels mean fewer interlocks across a wide opening, so a door of four to six metres can be made in just two or three sections.
- Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
How much sun will a door in Pembroke Dock get?
In Pembroke Dock the shortest day has roughly 7 h 48 min of daylight and the longest about 16 h 40 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Typical costs for lift and slide doors around Pembroke Dock
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Pembroke Dock home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 2 panels | £9,695–£11,795 |
| 4.0 m | 2 panels | £10,395–£12,695 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
Timescales for lift and slide doors in Pembroke Dock
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Do you need approval in Pembroke Dock?
In Wales, replacement doors are covered by the Building Regulations as applied in Wales, including the Welsh Part L energy requirements and safety glazing rules. Compliance is arranged through a competent person scheme installer or your council's Building Control, and the certificate is kept with your property records.
Choosing the specification
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
Questions about lift and slide doors in Pembroke Dock
How soon can you survey in Pembroke Dock?
Surveys in the SA72 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
Are lift and slide doors secure?
Lift and slide doors are secure when specified with multi-point locking and laminated glass, because the lowered panel sits on the frame and the locks engage as it drops. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets, and a key-locking handle can be added. The sheer weight of the panel also makes forcing it out of the track much harder.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.