- Postcode district
- SA72
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Milford Haven, Haverfordwest, Tenby
- Building rules
- Wales
Are slimline sliding doors right for your Pembroke Dock home?
Here is what to weigh up if you are considering slimline sliding doors for a home in Pembroke Dock:
Where the plans for a Pembroke Dock project show a wide glazed rear wall, the structural engineer should know the panel weights early so the steel can be sized for them.
If you are building an extension in Pembroke Dock, choosing slimline sliding doors before the floor is screeded allows the frame to be recessed for a near frameless finish.
- Profiles stay just as narrow on tall panels as on standard-height ones, keeping the sightlines consistent from floor to ceiling.
- Interlocks of around 20–25 mm leave the meeting point between panels as a thin line, so the view across the door is close to uninterrupted glass.
- Triple glazing is available on many slimline systems, bringing typical whole-door U-values down to around 0.8–1.1 W/m²K without bulking up the visible frame.
Light and sun in Pembroke Dock
At the latitude of Pembroke Dock, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 48 min against 16 h 40 min in midsummer. A south-facing slimline sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
How much do slimline sliding doors cost in Pembroke Dock?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Pembroke Dock home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,495–£6,795 |
| 3.6 m | 2 panels | £7,795–£9,495 |
| 4.0 m | 3 panels | £8,395–£10,195 |
See every size on the slimline sliding doors page or try the guide price tool.
How fitting works in Pembroke Dock
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days; allow 3–5 days of building work first if the opening is formed or widened for a door like this.
Rules for slimline sliding doors in Wales
In Wales, replacement doors are covered by the Building Regulations as applied in Wales, including the Welsh Part L energy requirements and safety glazing rules. Compliance is arranged through a competent person scheme installer or your council's Building Control, and the certificate is kept with your property records.
Which options matter for slimline sliding doors?
- Glass. Double or triple glazed safety glass, with solar-control, low-iron or laminated units available.
- Panel layout. Two panels with one or both sliding, or three and four panel layouts for wider openings.
- Threshold detail. A low threshold for straight replacements, or a flush floor-to-terrace finish with a drainage channel on extensions.
Questions about slimline sliding doors in Pembroke Dock
Do I need building approval for slimline sliding doors in Pembroke Dock?
In Wales a replacement door must meet the Building Regulations as applied in Wales, arranged through a registered installer or Building Control. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How slim is a slimline sliding door?
A slimline sliding door typically has a central interlock of around 20–25 mm, the narrow vertical section where the two panels meet. Standard aluminium sliders are considerably wider at this point. With the outer frame recessed into the floor, walls and ceiling, the interlock can be almost the only visible aluminium. Exact figures vary by system and are confirmed in your quote.
How do you clean a slimline sliding door?
Clean a slimline sliding door by vacuuming the stainless track, wiping it with a damp cloth and washing the glass and frames with mild soapy water. A flush threshold's outside drainage channel needs clearing of leaves and grit, because it is what keeps water away from the floor. Large panes are easier with a long-handled squeegee. Manufacturer guarantees are passed to you, with our workmanship guarantee set out in writing in your quote.
Are slimline sliding doors less secure because the frames are thin?
Slimline sliding doors are not less secure simply because the frames are thin; security depends on the locking, the glass and how the panels are held in the track. Well-specified systems use multi-point locks concealed in the interlock, anti-lift features and laminated glass. Slimline systems are available tested to PAS 24, and laminated inner panes can be specified where security is a priority.