- Postcode district
- SW11
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Chelsea, Wandsworth, Fulham
- Building rules
- England
Why choose lift and slide doors in Battersea?
Here is what to weigh up if you are considering lift and slide doors for a home in Battersea:
Before lift and slide doors are ordered for a Battersea extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
When you want a door left a hand's width open on a breezy day in Battersea, a lowered lift and slide panel stays exactly where it is set.
- Deep, thermally broken frames carry thick triple glazed units where needed, with typical whole-door U-values around 0.8–1.1 W/m²K at that specification.
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
- Low thresholds of around 15–25 mm, or a flush finish with external drainage, are possible on many systems, so even a heavy door can give level access to a terrace.
Sunlight, glass and orientation in Battersea
Daylight in Battersea runs from about 7 h 50 min in December to 16 h 38 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
What should you budget for lift and slide doors in Battersea?
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 2 panels | £9,695–£11,795 |
| 4.0 m | 2 panels | £10,395–£12,695 |
| 4.8 m | 3 panels | £11,795–£14,395 |
See every size on the lift and slide doors page or try the guide price tool.
How fitting works in Battersea
We plan the job around your home in Battersea: survey first, then a written quote, then manufacture (typically 6–8 weeks from survey sign-off). The fitting itself usually takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. If you are in Chelsea or Wandsworth, the same process and prices apply.
Do you need approval in Battersea?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Choosing the specification
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Handle. A long lever handle sized for the lifting gear, in a finish to match the frame, with a key-locking option.
Questions about lift and slide doors in Battersea
Is the price different in Battersea?
No. Guide prices for lift and slide doors are the same across mainland Britain, including Battersea. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.