- Postcode district
- SW15
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Fulham, Wandsworth, Barnes
- Building rules
- England
Lift and slide doors in Putney: what to know
The right door depends on the opening, the room and the way you use the garden. Here is how lift and slide doors tend to work out in practice:
If your Putney home has an exposed elevation that takes driving rain, the compressed seals of lift and slide doors give a tighter closure than brush-sealed sliders.
When you want a door left a hand's width open on a breezy day in Putney, a lowered lift and slide panel stays exactly where it is set.
- Larger panels mean fewer interlocks across a wide opening, so a door of four to six metres can be made in just two or three sections.
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
- Low thresholds of around 15–25 mm, or a flush finish with external drainage, are possible on many systems, so even a heavy door can give level access to a terrace.
Light and sun in Putney
In Putney the shortest day has roughly 7 h 50 min of daylight and the longest about 16 h 38 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Lift and slide doors prices in Putney
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 4.0 m | 2 panels | £10,395–£12,695 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
How fitting works in Putney
A surveyor visits your Putney home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 6–8 weeks from survey sign-off — and fitting usually takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. We also cover Fulham (2 km north-east) and Wandsworth (2 km east).
Rules for lift and slide doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Material. Thermally broken aluminium, or timber and alu-clad timber lift and slide systems for a warmer interior look.
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
Questions about lift and slide doors in Putney
Do I need building approval for lift and slide doors in Putney?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
Are lift and slide doors more weathertight than standard sliders?
Lift and slide doors are generally more weathertight than standard inline sliders, because the panel's weight compresses firm gaskets when closed instead of relying on brush seals it rubs past. Typical whole-door U-values are around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed. In England, a door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better; Wales, Scotland and Northern Ireland have their own rules.
Do lift and slide doors need servicing?
Lift and slide doors need light, regular care rather than heavy servicing: keep the track and drainage clear, wipe the gaskets with a damp cloth, and check the handle gear runs smoothly once a year. Because the seals are not dragged during opening, they wear slowly. If a panel ever drops unevenly, the rollers and lifting gear can be adjusted, and a worn gasket can be replaced on its own without changing the panel.