- Postcode district
- W6
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Notting Hill, Kensington, Chiswick
- Building rules
- England
Lift and slide doors in Hammersmith: what to know
Before you settle on a door type, it helps to know what lift and slide doors do well and what to check before you order.
When you want a door left a hand's width open on a breezy day in Hammersmith, a lowered lift and slide panel stays exactly where it is set.
Before lift and slide doors are ordered for a Hammersmith extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
- Geared lifting hardware lets one person move a panel weighing several hundred kilograms with a gentle push, which ordinary sliding rollers could not manage.
- Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
Sunlight, glass and orientation in Hammersmith
The midday sun over Hammersmith ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Lift and slide doors prices in Hammersmith
Guide prices are the same across Greater London: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,595–£10,495 |
| 4.0 m | 2 panels | £10,395–£12,695 |
See every size on the lift and slide doors page or try the guide price tool.
How fitting works in Hammersmith
Surveys in the W6 district are booked at a time that suits you. After you approve the quote, manufacture is typically 6–8 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened.
Rules for lift and slide doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for lift and slide doors
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
Questions about lift and slide doors in Hammersmith
Can you match other doors and windows in my Hammersmith home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
Will I need Building Regulations approval for a large lift and slide door?
A large lift and slide door often needs Building Regulations approval for the structural work, because forming or widening an opening in England needs an application, structural calculations and usually a steel beam. The door itself is a controlled fitting, installed by a competent person scheme installer or notified to Building Control, with safety glazing throughout. Scotland needs a building warrant for a new or wider opening; Wales and Northern Ireland have their own rules.
Are lift and slide doors secure?
Lift and slide doors are secure when specified with multi-point locking and laminated glass, because the lowered panel sits on the frame and the locks engage as it drops. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets, and a key-locking handle can be added. The sheer weight of the panel also makes forcing it out of the track much harder.