- Postcode district
- SE6
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Lewisham, Forest Hill, Blackheath
- Building rules
- England
What lift and slide doors offer homes in Catford
These are the points a surveyor will go through with you when you choose lift and slide doors for a home in Catford:
If rear access to your Catford property is tight, the survey plans how panels weighing several hundred kilograms will be delivered and lifted into place.
If your Catford home has an exposed elevation that takes driving rain, the compressed seals of lift and slide doors give a tighter closure than brush-sealed sliders.
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
- Low thresholds of around 15–25 mm, or a flush finish with external drainage, are possible on many systems, so even a heavy door can give level access to a terrace.
- Geared lifting hardware lets one person move a panel weighing several hundred kilograms with a gentle push, which ordinary sliding rollers could not manage.
Light and sun in Catford
At the latitude of Catford, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 50 min against 16 h 38 min in midsummer. A south-facing lift and slide door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for lift and slide doors in Catford
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Catford home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £8,595–£10,495 |
| 4.0 m | 2 panels | £10,395–£12,695 |
| 4.8 m | 3 panels | £11,795–£14,395 |
See every size on the lift and slide doors page or try the guide price tool.
From survey to fitted door in Catford
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Do you need approval in Catford?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for lift and slide doors in Catford
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Handle. A long lever handle sized for the lifting gear, in a finish to match the frame, with a key-locking option.
Questions about lift and slide doors in Catford
How soon can you survey in Catford?
Surveys in the SE6 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
Will I need Building Regulations approval for a large lift and slide door?
A large lift and slide door often needs Building Regulations approval for the structural work, because forming or widening an opening in England needs an application, structural calculations and usually a steel beam. The door itself is a controlled fitting, installed by a competent person scheme installer or notified to Building Control, with safety glazing throughout. Scotland needs a building warrant for a new or wider opening; Wales and Northern Ireland have their own rules.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.