- Postcode district
- SE21
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Brixton, Forest Hill, Sydenham
- Building rules
- England
Lift and slide doors in Dulwich: what to know
Here is what to weigh up if you are considering lift and slide doors for a home in Dulwich:
Before lift and slide doors are ordered for a Dulwich extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
Planning a terrace door wider than about 4 m in Dulwich? Lift and slide hardware lets each panel be larger, so the opening needs fewer interlocks.
- Low thresholds of around 15–25 mm, or a flush finish with external drainage, are possible on many systems, so even a heavy door can give level access to a terrace.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
- Larger panels mean fewer interlocks across a wide opening, so a door of four to six metres can be made in just two or three sections.
Sunlight, glass and orientation in Dulwich
The midday sun over Dulwich ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Lift and slide doors prices in Dulwich
Guide prices are the same across Greater London: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 4.0 m | 2 panels | £10,395–£12,695 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
What happens when you order lift and slide doors in Dulwich?
Here is the usual sequence in Dulwich: guide price, free survey, written quote, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. Nearby, we also survey in Brixton, Forest Hill and Sydenham.
Rules for lift and slide doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for lift and slide doors in Dulwich
- Handle. A long lever handle sized for the lifting gear, in a finish to match the frame, with a key-locking option.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
Questions about lift and slide doors in Dulwich
Can you match other doors and windows in my Dulwich home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
Are lift and slide doors more weathertight than standard sliders?
Lift and slide doors are generally more weathertight than standard inline sliders, because the panel's weight compresses firm gaskets when closed instead of relying on brush seals it rubs past. Typical whole-door U-values are around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed. In England, a door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better; Wales, Scotland and Northern Ireland have their own rules.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.