- Postcode district
- LD2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Llandrindod Wells, Hay-on-Wye, Brecon
- Building rules
- Wales
Are lift and slide doors right for your Builth Wells home?
Most homeowners choosing lift and slide doors want the same things: more light, a clear view and a door that is easy to live with.
Before lift and slide doors are ordered for a Builth Wells extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
If rear access to your Builth Wells property is tight, the survey plans how panels weighing several hundred kilograms will be delivered and lifted into place.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
- Low thresholds of around 15–25 mm, or a flush finish with external drainage, are possible on many systems, so even a heavy door can give level access to a terrace.
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
How much sun will a door in Builth Wells get?
Because Builth Wells sees long summer days (about 16 h 46 min) and short winter ones (about 7 h 43 min), the elevation your door faces makes a real difference. With the midday sun at about 14° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Lift and slide doors prices in Builth Wells
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 2 panels | £9,695–£11,795 |
| 4.0 m | 2 panels | £10,395–£12,695 |
| 4.8 m | 3 panels | £11,795–£14,395 |
See every size on the lift and slide doors page or try the guide price tool.
Survey, manufacture and fitting around Builth Wells
We plan the job around your home in Builth Wells: survey first, then a written quote, then manufacture (typically 6–8 weeks from survey sign-off). The fitting itself usually takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. If you are in Llandrindod Wells or Hay-on-Wye, the same process and prices apply.
Rules for lift and slide doors in Wales
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Specification choices for lift and slide doors in Builth Wells
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Material. Thermally broken aluminium, or timber and alu-clad timber lift and slide systems for a warmer interior look.
- Handle. A long lever handle sized for the lifting gear, in a finish to match the frame, with a key-locking option.
Questions about lift and slide doors in Builth Wells
Do I need building approval for lift and slide doors in Builth Wells?
In Wales a replacement door must meet the Building Regulations as applied in Wales, arranged through a registered installer or Building Control. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.
Are lift and slide doors secure?
Lift and slide doors are secure when specified with multi-point locking and laminated glass, because the lowered panel sits on the frame and the locks engage as it drops. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets, and a key-locking handle can be added. The sheer weight of the panel also makes forcing it out of the track much harder.