- Postcode district
- HR3
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Kington, Builth Wells, Brecon
- Building rules
- Wales
Why choose lift and slide doors in Hay-on-Wye?
Here is what to weigh up if you are considering lift and slide doors for a home in Hay-on-Wye:
Planning a terrace door wider than about 4 m in Hay-on-Wye? Lift and slide hardware lets each panel be larger, so the opening needs fewer interlocks.
Comparing lift and slide with slimline for a Hay-on-Wye project usually comes down to one question: do panel size and sealing matter more to you than the narrowest possible interlock?
- Geared lifting hardware lets one person move a panel weighing several hundred kilograms with a gentle push, which ordinary sliding rollers could not manage.
- Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.
- Deep, thermally broken frames carry thick triple glazed units where needed, with typical whole-door U-values around 0.8–1.1 W/m²K at that specification.
Light and sun in Hay-on-Wye
In Hay-on-Wye the shortest day has roughly 7 h 44 min of daylight and the longest about 16 h 45 min. The noon sun sits near 14° above the horizon in winter and 61° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
What should you budget for lift and slide doors in Hay-on-Wye?
Guide prices are the same across Powys: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,595–£10,495 |
| 4.8 m | 3 panels | £11,795–£14,395 |
See every size on the lift and slide doors page or try the guide price tool.
What happens when you order lift and slide doors in Hay-on-Wye?
We plan the job around your home in Hay-on-Wye: survey first, then a written quote, then manufacture (typically 6–8 weeks from survey sign-off). The fitting itself usually takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. If you are in Kington or Builth Wells, the same process and prices apply.
Rules for lift and slide doors in Wales
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Finishes and extras for lift and slide doors
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Glass. Double or triple glazed safety glass, with acoustic laminated or solar-control units for exposed or noisy sites.
Questions about lift and slide doors in Hay-on-Wye
How soon can you survey in Hay-on-Wye?
Surveys in the HR3 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.