- Postcode district
- BA5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Shepton Mallet, Glastonbury, Street
- Building rules
- England
Is a lift and slide door a good fit for your home in Wells?
Before you settle on a door type, it helps to know what lift and slide doors do well and what to check before you order.
Comparing lift and slide with slimline for a Wells project usually comes down to one question: do panel size and sealing matter more to you than the narrowest possible interlock?
If rear access to your Wells property is tight, the survey plans how panels weighing several hundred kilograms will be delivered and lifted into place.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
- Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
Light and sun in Wells
Daylight in Wells runs from about 7 h 52 min in December to 16 h 35 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
What should you budget for lift and slide doors in Wells?
Pricing is transparent and does not change because you are in Wells. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 4.0 m | 2 panels | £10,395–£12,695 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
Timescales for lift and slide doors in Wells
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Do you need approval in Wells?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Which options matter for lift and slide doors?
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Handle. A long lever handle sized for the lifting gear, in a finish to match the frame, with a key-locking option.
Questions about lift and slide doors in Wells
Can you match other doors and windows in my Wells home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.