- Postcode district
- BA16
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Glastonbury, Wells, Shepton Mallet
- Building rules
- England
Why choose lift and slide doors in Street?
Most homeowners choosing lift and slide doors want the same things: more light, a clear view and a door that is easy to live with.
Before lift and slide doors are ordered for a Street extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
Comparing lift and slide with slimline for a Street project usually comes down to one question: do panel size and sealing matter more to you than the narrowest possible interlock?
- Geared lifting hardware lets one person move a panel weighing several hundred kilograms with a gentle push, which ordinary sliding rollers could not manage.
- Deep, thermally broken frames carry thick triple glazed units where needed, with typical whole-door U-values around 0.8–1.1 W/m²K at that specification.
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
Sunlight, glass and orientation in Street
Daylight in Street runs from about 7 h 53 min in December to 16 h 34 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do lift and slide doors cost in Street?
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 2 panels | £9,695–£11,795 |
| 4.8 m | 3 panels | £11,795–£14,395 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
How fitting works in Street
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Rules for lift and slide doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Handle. A long lever handle sized for the lifting gear, in a finish to match the frame, with a key-locking option.
- Glass. Double or triple glazed safety glass, with acoustic laminated or solar-control units for exposed or noisy sites.
Questions about lift and slide doors in Street
Can you match other doors and windows in my Street home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.
Will I need Building Regulations approval for a large lift and slide door?
A large lift and slide door often needs Building Regulations approval for the structural work, because forming or widening an opening in England needs an application, structural calculations and usually a steel beam. The door itself is a controlled fitting, installed by a competent person scheme installer or notified to Building Control, with safety glazing throughout. Scotland needs a building warrant for a new or wider opening; Wales and Northern Ireland have their own rules.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.