- Postcode district
- BA16
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Glastonbury, Wells, Shepton Mallet
- Building rules
- England
Are replacement sliding doors right for your Street home?
A few practical points decide whether replacement sliding doors suit a particular room and opening:
If your Street home still has its original sliding patio door, look at the glass beads: if they are on the outside, a replacement will close off that weakness.
Considering a wider door for your Street home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.
- Most two-panel replacements are completed in a single day, so the house is secure again by the evening without the room being out of use for long.
- Multipoint locks, anti-lift devices and internally beaded glass close the security gaps that older patio doors commonly have, such as panels that can be lifted out.
- New rollers and a precision track make a heavy door glide with a light push, where an old door may need both hands and a firm shove to open.
Light and sun in Street
Daylight in Street runs from about 7 h 53 min in December to 16 h 34 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Guide prices for replacement sliding doors in Street
Pricing is transparent and does not change because you are in Street. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £4,995–£6,095 |
| 4.0 m | 3 panels | £6,095–£7,395 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the replacement sliding doors page or try the guide price tool.
From survey to fitted door in Street
Surveys in the BA16 district are booked at a time that suits you. After you approve the quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight two-panel swap; 1–2 days for larger doors.
Do you need approval in Street?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your replacement sliding door
- Upgraded glass. Triple, laminated, solar-control or obscure glass to suit the elevation.
- Slimline upgrade. Narrow interlocks for the maximum glass area the existing opening allows.
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
Questions about replacement sliding doors in Street
How soon can you survey in Street?
Surveys in the BA16 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off.
Do I need planning permission to replace a sliding door?
Replacing doors on a house is usually permitted development, so no planning application is needed, as long as the new doors are similar in appearance to the existing ones. Flats, listed buildings and properties covered by an Article 4 direction may need consent. Our planning guide explains more.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.
What happens to my old patio door?
We remove your old patio door and take it away for disposal as part of the job, and that is included in our guide prices, so there is nothing for you to arrange. If you would rather keep the old door, for example for a shed or greenhouse project, tell us before the fitting day and we will leave it safely on site.