- Postcode district
- DT9
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Yeovil, Street, Dorchester
- Building rules
- England
Are replacement sliding doors right for your Sherborne home?
A few practical points decide whether replacement sliding doors suit a particular room and opening:
Before booking a survey for a Sherborne flat, check your lease or title deeds and speak to the managing agent, factor or other owners, because doors in flats may need consent that houses do not.
Does the old door in your Sherborne kitchen whistle in the wind or leave puddles on the sill? Worn seals and failed drainage are common reasons to replace rather than repair.
- Because the opening stays the same size, a straight replacement avoids structural work, steel beams and a Building Regulations structural application.
- A thermally broken frame with modern double glazing must achieve 1.4 W/m²K or better in England for a door in an existing home with more than 60% glazing, which is far better than most old sliders.
- Certification through a competent person scheme installer, or notification to Building Control, is arranged as part of the job and gives you a record for when you sell.
Light and sun in Sherborne
In Sherborne the shortest day has roughly 7 h 55 min of daylight and the longest about 16 h 32 min. The noon sun sits near 16° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
What should you budget for replacement sliding doors in Sherborne?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Sherborne home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £3,995–£4,895 |
| 3.6 m | 3 panels | £5,595–£6,895 |
| 4.0 m | 3 panels | £6,095–£7,395 |
See every size on the replacement sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Sherborne
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight two-panel swap; 1–2 days for larger doors for a door like this.
Rules for replacement sliding doors in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Specification choices for replacement sliding doors in Sherborne
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
- Slimline upgrade. Narrow interlocks for the maximum glass area the existing opening allows.
Questions about replacement sliding doors in Sherborne
How soon can you survey in Sherborne?
Surveys in the DT9 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off.
What if there is no proper lintel above my old door?
Occasionally an old door frame turns out to be carrying some load because the support above the opening is inadequate or missing. We check the head of the opening at survey and again when the old frame comes out. If extra support is needed, we explain why, what it involves and what it costs before any further work goes ahead.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
What happens to my old patio door?
We remove your old patio door and take it away for disposal as part of the job, and that is included in our guide prices, so there is nothing for you to arrange. If you would rather keep the old door, for example for a shed or greenhouse project, tell us before the fitting day and we will leave it safely on site.