- Postcode district
- BA5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Shepton Mallet, Glastonbury, Street
- Building rules
- England
Why choose replacement sliding doors in Wells?
A few practical points decide whether replacement sliding doors suit a particular room and opening:
Selling a house in Wells in the next few years? Keep the competent person scheme certificate or Building Control notice for the new door with your property paperwork.
If the existing opening in your Wells home is sound and a sensible size, simply replacing the door gives the biggest improvement for the least disruption.
- Certification through a competent person scheme installer, or notification to Building Control, is arranged as part of the job and gives you a record for when you sell.
- Slimmer modern frames often give a larger area of glass within the same opening, letting more daylight into the room than the old door did.
- Most two-panel replacements are completed in a single day, so the house is secure again by the evening without the room being out of use for long.
Daylight in Wells and what it means for your glass
The midday sun over Wells ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
How much do replacement sliding doors cost in Wells?
Pricing is transparent and does not change because you are in Wells. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £3,695–£4,495 |
| 4.8 m | 4 panels | £6,995–£8,495 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the replacement sliding doors page or try the guide price tool.
Timescales for replacement sliding doors in Wells
We plan the job around your home in Wells: survey first, then a written quote, then manufacture (typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off). The fitting itself usually takes 1 day for a straight two-panel swap; 1–2 days for larger doors. If you are in Shepton Mallet or Glastonbury, the same process and prices apply.
Rules for replacement sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for replacement sliding doors
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
Questions about replacement sliding doors in Wells
How soon can you survey in Wells?
Surveys in the BA5 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
What if there is no proper lintel above my old door?
Occasionally an old door frame turns out to be carrying some load because the support above the opening is inadequate or missing. We check the head of the opening at survey and again when the old frame comes out. If extra support is needed, we explain why, what it involves and what it costs before any further work goes ahead.
Is the survey free for a replacement door?
Yes, the survey for a replacement sliding door is free. We measure the opening, check its condition and the support above it, look at floor and outside levels, and talk through frame, glass and colour options. You then receive a written quote with the fixed price, and nothing is ordered until you confirm the surveyed specification in writing.