- Postcode district
- BA11
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Warminster, Trowbridge, Bradford-on-Avon
- Building rules
- England
Are replacement sliding doors right for your Frome home?
These are the points a surveyor will go through with you when you choose replacement sliding doors for a home in Frome:
Does the old door in your Frome kitchen whistle in the wind or leave puddles on the sill? Worn seals and failed drainage are common reasons to replace rather than repair.
Selling a house in Frome in the next few years? Keep the competent person scheme certificate or Building Control notice for the new door with your property paperwork.
- New rollers and a precision track make a heavy door glide with a light push, where an old door may need both hands and a firm shove to open.
- Certification through a competent person scheme installer, or notification to Building Control, is arranged as part of the job and gives you a record for when you sell.
- Multipoint locks, anti-lift devices and internally beaded glass close the security gaps that older patio doors commonly have, such as panels that can be lifted out.
Sunlight, glass and orientation in Frome
Sun angles matter for big glazed doors. Around Frome, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
How much do replacement sliding doors cost in Frome?
Pricing is transparent and does not change because you are in Frome. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 3 panels | £5,595–£6,895 |
| 4.0 m | 3 panels | £6,095–£7,395 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the replacement sliding doors page or try the guide price tool.
How fitting works in Frome
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight two-panel swap; 1–2 days for larger doors for a door like this.
Rules for replacement sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Upgraded glass. Triple, laminated, solar-control or obscure glass to suit the elevation.
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
- Aluminium replacement. A thermally broken aluminium slider with slim frames and a durable powder-coat finish.
Questions about replacement sliding doors in Frome
Can you match other doors and windows in my Frome home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
Do I need building regulations approval to replace a patio door?
In England a replacement door is a controlled fitting, so it must meet the Building Regulations for energy and safety glazing. You do not apply in advance; instead the work is self-certified by a competent person scheme installer or notified to Building Control, which we arrange. In Scotland like-for-like replacement in a house usually needs no building warrant but must still meet the building standards.