- Postcode district
- DT9
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Yeovil, Street, Dorchester
- Building rules
- England
Is a sliding door for an extension a good fit for your home in Sherborne?
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
For a garden room at the bottom of a Sherborne garden, think about access: large glass panels need a clear route from the road to the site.
When your Sherborne extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
Sunlight, glass and orientation in Sherborne
Daylight in Sherborne runs from about 7 h 55 min in December to 16 h 32 min in June, with the noon sun at roughly 16° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Guide prices for sliding doors for extensions in Sherborne
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £5,995–£7,295 |
| 4.0 m | 3 panels | £8,395–£10,195 |
| 4.8 m | 3 panels | £9,595–£11,695 |
See every size on the sliding doors for extensions page or try the guide price tool.
What happens when you order sliding doors for extensions in Sherborne?
Surveys in the DT9 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days, scheduled to the build programme.
Do you need approval in Sherborne?
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Which options matter for sliding doors for extensions?
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
Questions about sliding doors for extensions in Sherborne
Is the price different in Sherborne?
No. Guide prices for sliding doors for extensions are the same across mainland Britain, including Sherborne. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.