- Postcode district
- BA20
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Sherborne, Street, Glastonbury
- Building rules
- England
Are sliding doors for extensions right for your Yeovil home?
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for extensions tend to work out in practice:
Self-building in Yeovil or elsewhere in Somerset? Ask for the sliding doors to be quoted as part of a wider glazing package so the frames, colours and glass match across the house.
For a garden room at the bottom of a Yeovil garden, think about access: large glass panels need a clear route from the road to the site.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- Agreeing a fitting date with your builder lets the extension be made weathertight on programme, so plastering and flooring can follow without waiting on the doors.
Sunlight, glass and orientation in Yeovil
Because Yeovil sees long summer days (about 16 h 32 min) and short winter ones (about 7 h 55 min), the elevation your door faces makes a real difference. With the midday sun at about 16° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
How much do sliding doors for extensions cost in Yeovil?
Guide prices are the same across Somerset. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,495–£6,795 |
| 2.4 m | 2 panels | £5,995–£7,295 |
| 4.8 m | 3 panels | £9,595–£11,695 |
See every size on the sliding doors for extensions page or try the guide price tool.
From survey to fitted door in Yeovil
Surveys in the BA20 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days, scheduled to the build programme.
Rules for sliding doors for extensions in England
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Finishes and extras for sliding doors for extensions
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
Questions about sliding doors for extensions in Yeovil
How soon can you survey in Yeovil?
Surveys in the BA20 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.