- Postcode district
- CF10
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Penarth, Dinas Powys, Caerphilly
- Building rules
- Wales
Why choose lift and slide doors in Cardiff?
A few practical points decide whether lift and slide doors suit a particular room and opening:
Comparing lift and slide with slimline for a Cardiff project usually comes down to one question: do panel size and sealing matter more to you than the narrowest possible interlock?
Planning a terrace door wider than about 4 m in Cardiff? Lift and slide hardware lets each panel be larger, so the opening needs fewer interlocks.
- Turning the handle raises the panel clear of its gaskets before it moves, so the seals are not scuffed along the frame and keep their shape for longer.
- Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
Planning glass for the light in Cardiff
Daylight in Cardiff runs from about 7 h 50 min in December to 16 h 38 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Typical costs for lift and slide doors around Cardiff
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Cardiff home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,595–£10,495 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
From survey to fitted door in Cardiff
We plan the job around your home in Cardiff: survey first, then a written quote, then manufacture (typically 6–8 weeks from survey sign-off). The fitting itself usually takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. If you are in Penarth or Dinas Powys, the same process and prices apply.
Do you need approval in Cardiff?
In Wales, replacement doors are covered by the Building Regulations as applied in Wales, including the Welsh Part L energy requirements and safety glazing rules. Compliance is arranged through a competent person scheme installer or your council's Building Control, and the certificate is kept with your property records.
Options to consider for your lift and slide door
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Glass. Double or triple glazed safety glass, with acoustic laminated or solar-control units for exposed or noisy sites.
Questions about lift and slide doors in Cardiff
How soon can you survey in Cardiff?
Surveys in the CF10 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.
Do lift and slide doors need servicing?
Lift and slide doors need light, regular care rather than heavy servicing: keep the track and drainage clear, wipe the gaskets with a damp cloth, and check the handle gear runs smoothly once a year. Because the seals are not dragged during opening, they wear slowly. If a panel ever drops unevenly, the rollers and lifting gear can be adjusted, and a worn gasket can be replaced on its own without changing the panel.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.