- Postcode district
- CF83
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Risca, Pontypridd, Blackwood
- Building rules
- Wales
What lift and slide doors offer homes in Caerphilly
A few practical points decide whether lift and slide doors suit a particular room and opening:
Planning a terrace door wider than about 4 m in Caerphilly? Lift and slide hardware lets each panel be larger, so the opening needs fewer interlocks.
When you want a door left a hand's width open on a breezy day in Caerphilly, a lowered lift and slide panel stays exactly where it is set.
- Low thresholds of around 15–25 mm, or a flush finish with external drainage, are possible on many systems, so even a heavy door can give level access to a terrace.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
- Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.
Sunlight, glass and orientation in Caerphilly
At the latitude of Caerphilly, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 49 min against 16 h 39 min in midsummer. A south-facing lift and slide door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for lift and slide doors in Caerphilly
Guide prices are the same across Mid Glamorgan: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,595–£10,495 |
| 4.0 m | 2 panels | £10,395–£12,695 |
See every size on the lift and slide doors page or try the guide price tool.
What happens when you order lift and slide doors in Caerphilly?
A surveyor visits your Caerphilly home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 6–8 weeks from survey sign-off — and fitting usually takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. We also cover Risca (9 km north-east) and Pontypridd (9 km west).
Rules for lift and slide doors in Wales
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Which options matter for lift and slide doors?
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
Questions about lift and slide doors in Caerphilly
Do you fit lift and slide doors in Caerphilly?
Yes. We survey and fit lift and slide doors in Caerphilly and across Mid Glamorgan, including nearby Risca and Pontypridd. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.